چکیده مقاله
Well instability is one of the most fundamental challenges faced by the oil and gas industry This imposes high annual costs for oil companies Thus, well wall stability analysis is a gap to be filled in the oil industry Collection of data on elements such as in situ stress, reservoir and well pressure, mechanical rock properties and drilling fluid leads to the construction of a geomechanical numerical model, which will help in assessing the probable risks in future drilling When a geomechanical model is designed, the magnitude and principal stress directions, pore pressure, and mechanical properties of the rock are determined at all points of the model In this case, it is possible to investigate the amount of well instability as a function of weight and properties of drilling fluid In this paper, the safe mud window was determined and the minimum and maximum mud pressures were determined in the ranges of 70 60 MPa and 110 100 MPa respectively in relation to different depths A modeling of well stability in underbalanced drilling was made by entering the mechanical properties in FLAC software
کلیدواژهها
نویسندگان
Marzieh Zarei
Master of Petroleum Engineering
شیوه ارجاع
Zarei, Marzieh,1398,Geomechanical Numerical Modeling of Well Wall in Underbalanced Drilling with Finite Difference Method,International Conference on Technology Development in Chemical Engineering,Tehran
ارائهشده در
مجموعه مقالات کنفرانس بین المللی توسعه فناوری در مهندسی شیمی16 اسفند 1398 · تهران