چکیده مقاله
Machining of steel inherently generate high cutting temperature, which not only reduces tool life but also impairs the product quality Conventional cutting fluids are ineffective in controlling the high cutting temperature and rapid tool wear Further they also deteriorate the working environment and lead to general environmental pollution Cryogenic cooling is an environment friendly clean technology for desirable control of cutting temperature The present work deals with experimental investigation in the role of cryogenic cooling by liquid nitrogen jet on cutting temperature, tool wear, surface finish and dimensional deviation in turning of AISI 1060 steel at industrial speed feed combination by coated carbide insert The results have been compared with dry machining and machining with soluble oil as coolant The results of the present work indicate substantial benefit of cryogenic cooling on tool life, surface finish and dimensional deviation This may be attributed to mainly reduction in cutting zone temperature and favorable change in the chip tool interaction Further it was evident that machining with soluble oil cooling failed to provide any significant improvement in tool life, rather surface finish deteriorated
کلیدواژهها
نویسندگان
N.D Dhar
ProfessorDepartment of Industrial & Production Engineering Bangladesh University of Engineering & Technology Dhaka, Bangladesh
M Kamruzzaman
Lecturer, Department of Mechanical Engineering, DUET, Gazipur, Dhaka, Bangladesh
شیوه ارجاع
Dhar, N.D and Kamruzzaman, M,1384,Cutting Temperature, Tool Wear, Surface Roughness and Dimensional Deviation in Cryogenic Machining,01st Tehran International Congress on Manufacturing Engineering (TICME2005),Tehran
ارائهشده در
مجموعه مقالات اولین کنفرانس بین المللی و هفتمین کنفرانس ملی مهندسی ساخت و تولید1 فروردین 1384 · تهران