چکیده مقاله
In this paper the hydromechanical deep drawing and the effect of friction in the process has been studied using FE method To verify the results of FE simulations, an experimental study has been used in a specific friction condition Numerical results indicate a working zone with a maximum chamber pressure in which the maximum limit drawing ratio can be achieved Numerical result shows that increasing the friction between blank and die or blank and blank holder decrease the LDR value while increasing the friction between blank and punch increase the LDR value
کلیدواژهها
نویسندگان
A Fazli
M Sc Student of mechanical engineering department
B.M Dariani
Associated professor of mechanical engineering department
شیوه ارجاع
Fazli, A and Dariani, B.M,1384,Investigation of friction effect in limit drawing ratio of hydromechanical deep drawing process,01st Tehran International Congress on Manufacturing Engineering (TICME2005),Tehran
ارائهشده در
مجموعه مقالات اولین کنفرانس بین المللی و هفتمین کنفرانس ملی مهندسی ساخت و تولید1 فروردین 1384 · تهران