مقاله کنفرانسی سال ۱۳۸۷ انگلیسی

Design and Development a Novel industrial Humanoid Robot

Design and Development a Novel industrial Humanoid Robot

چکیده مقاله

This paper presents an overview of an industrial humanoid robot We have tried to focus on areas such as mechanical structure, Image processing unit, robot controller, Robot AI and behavior learning This year, our developments for the Kid size humanoid robot include: 1 the design and construction of our new industrial humanoid robots 2 the design and construction of a new hardware and software controller to be used in our robots The project is described in two main parts: Hardware and Software The software is developed a robot application which consists walking controller, autonomous motion robot, self localization base on vision and Particle Filter, local AI, Trajectory Planning, Motion Controller and Network The hardware consists of the mechanical structure and the driver circuit board Each robot is able to walk, fast walk, pass, kick and dribble when it catches the ball The project is still in progress and some new interesting methods are described in the current report

کلیدواژه‌ها

نویسندگان

تصویر S.H. Kasaei

S.H. Kasaei

Institute of Robotics and Intelligent Systems, Computer Engineering Department,Khorasgan Islamic Azad University, Isfahan, Iran

تصویر S.M. Kasaei

S.M. Kasaei

Institute of Robotics and Intelligent Systems, Computer Engineering Department,Khorasgan Islamic Azad University, Isfahan, Iran

تصویر S.A. Kasae

S.A. Kasae

Institute of Robotics and Intelligent Systems, Computer Engineering Department,Khorasgan Islamic Azad University, Isfahan, Iran

تصویر O. Godarzi

O. Godarzi

Institute of Robotics and Intelligent Systems, Computer Engineering Department,Khorasgan Islamic Azad University, Isfahan, Iran

شیوه ارجاع

Kasaei, S.H. and Kasaei, S.M. and Kasae, S.A. and Godarzi, O.,1387,Design and Development a Novel industrial Humanoid Robot,9th Iranian Conference on Manufacturing Engineering,Birjand

ارائه‌شده در

پوستر مجموعه مقالات نهمین کنفرانس مهندسی ساخت و تولید مجموعه مقالات نهمین کنفرانس مهندسی ساخت و تولید13 اسفند 1387 · بیرجند
ادامه مسیر پژوهش

مقالات مرتبط

مقاله کنفرانسی سال ۱۳۸۷ ۸,۰۸۰ مشاهده

تحلیل فرآیند ساخت یک موتور سیکلت هیبرید برقی

در این تحقیق مراحل ساخت یک موتور سیکلت هیبرید برقی مورد بررسی و تحلیل قرار گرفته است بدنی منظور یک موتور…

موتور سیکلتهیبریدموتور الکتریکی
مقاله کنفرانسی سال ۱۳۸۷ ۷,۷۱۳ مشاهده

ساخت چرخدنده مخروطی مارپیچ به کمک ماشین فرز CNC سه محوره و با استفاده از یک سیستم مکاترونیکی با کنترل منطقی قابل برنامه ریزی

چرخدنده ها به روش های مختلفی نظیر هابینگ، شیپینگ و تولید می شوند در این تحقیق، با بکارگیری زمینه های CAD…

CAD/CAM/CAECNCچرخدنده مخروطی مارپیچ
مقاله کنفرانسی سال ۱۳۸۷ ۷,۵۲۷ مشاهده

برنامه ریزی فرایند بهینه برای تولید یک مجموعه قطعات در کارگاههای قطعه سازی

تنوع بالای قطعات با تعداد تولید کم، از مشخصات عمده کارگاههای قطعه سازی است مسأله برنامه ریزی تولید یک مج…

کارگاه قطعه سازی Job shopزمان کل ساخت Make spanبرنامه ریزی فرآیند Process planning
مقاله کنفرانسی سال ۱۳۸۶ ۶,۶۹۱ مشاهده

کنترل ربات با استفاده از روش های کنترل غیر خطی و شبکه عصبی

در این مقاله، یک روش جدید برای کنترل ربات به روش NFL3 برای منیپولاتور های صلب ارائه شده است بعد از استخر…

بازوی مکانیکی ‐ خطی سازی به کمک فیدبک شبکه عصبی پرسپترون
مقاله کنفرانسی سال ۱۳۸۷ ۶,۵۶۳ مشاهده

پیاده سازی کنترل فرآیند آماری (SPC) دریک شرکت کاشی یزد

مقاله حاضر به بررسی کنترل فرآیند آماری در یک شرکت تولید کاشی می پردازد به این صورت که با بررسی کاشی های…

کاشینمودار کنترلیزد
مقاله کنفرانسی سال ۱۳۸۷ ۶,۳۸۴ مشاهده

تحلیل فرآیند خمکاری در یک قالب Vو بررسی پدیده برگشت فنری در ورق به کمک روش اجزای محدود

فرآِیند خمکاری یکی از مهم ترین روشهای تولید قطعات ورقی است که در صنایع خودرو سازی و قطعات الکتریکی کاربر…

برگشت فنریشکل دهی ورق فلزیخم V