چکیده مقاله
One of the important mechanical properties of flow formed tubes is hardness Design of experiment has been used to investigate the effects of flow forming parameters such as rotational speed of mandrel, feed rate and dept of cut of roller on the hardness of flowformed AISI 321 steel tube A mathematical prediction model of the hardness was developed using response surface methodology RSM RSM's Box Behanken design was employed for determining the optimum forming condition for minimum hardness at %95 optimum confidence level The hardness was found to increase with increase in the mandrel speed and the depth of cut and it decreased with decrease in the feed rate
کلیدواژهها
نویسندگان
N. Razani
MSc Student, Department of Engineering and High Tech, Iran University of Industries and Mines
B. Mollaei Dariani
Associate Professor, Mchanical Department, Amirkabir University
A. Jalali Aghchai
Assistant Professor, Department of Engineering and High Tech, Iran University of Industries and Mines
شیوه ارجاع
Razani, N. and Mollaei Dariani, B. and Jalali Aghchai, A.,1389,Hardness prediction of flow-formed AISI 321 steel tube using response surface method,11th Iranian Conference on Manufacturing Engineering (ICME 2010),Tabriz
ارائهشده در
مجموعه مقالات یازدهمین کنفرانس ملی مهندسی ساخت و تولید ایران27 مهر 1389 · تبریز