چکیده مقاله
Continuous glass fibers have been implemented as the reinforcement to produce continuous fiber reinforced thermoplastic composites via fused deposition modeling 3D printer One ma jor drawback in FDM process is the general weakness of the produced parts, due to the nature of the materials namely thermoplastics One conventional method is to strengthen plastics with continuous fibers of glass, aramid or carbon Due to the nature of extrusion based addi tive manufacturing processes, like FDM, where the part is formed by deposition of molten material, to embed reliably a solid and continuous material named fiber , is a serious chal lenge In the approach presented in this paper, a nozzle was designed so that the continuous glass fiber was guided into the molten area through the orifice from the side, where it was impregnated by the molten filament polymer Then, it was deposited on the bed, at the start,or on the previous layer, during built up This method enables the production of strengthened parts made of continuous fiber reinforced thermoplastic composite with various fiber content and various types of polymeric materials as the matrix The tensile strength of the produced parts increased significantly up to 300 MPa depending on the volumetric percentage of fi bers The maximum fibers volumetric percentage of 37% was obtained, and the results showed that the strength of the samples is consistent with the Rule of mixtures This con sistency indicates the effective role of the embedded fibers The manufactured products ex hibited excellent dimensional accuracy and good surface quality
کلیدواژهها
نویسندگان
Behnam khoundi
PHD Student, Faculty of Mechanical Engineering, Advanced Additive Manufacturing La boratory, Tarbiat Modares University, ۱۴۱۱۵ ۱۱۱, Tehran, Iran
Amir Hossein Behravesh
PHD Student, Faculty of Mechanical Engineering, Advanced Additive Manufacturing La boratory, Tarbiat Modares University, ۱۴۱۱۵ ۱۱۱, Tehran, Iran
Arvin Bagheri Saed
PHD Student, Faculty of Mechanical Engineering, Advanced Additive Manufacturing La boratory, Tarbiat Modares University, ۱۴۱۱۵ ۱۱۱, Tehran, Iran
شیوه ارجاع
khoundi, Behnam and Behravesh, Amir Hossein and Bagheri Saed, Arvin,1396,Production of Continuous Fiber Reinforced Ther-moplastic Composites via Fused Deposition Model-ing 3D Printer,14th Iran Engineering Manufacturing Conference,Arak
ارائهشده در
مجموعه مقالات چهاردهمین کنفرانس مهندسی ساخت و تولید ایران2 آبان 1396 · اراک