چکیده مقاله
This paper investigates the effect material parameters variation of the Gurson Tvergaard Needleman GTN model The effect of elastic modulus, calibration parameter of GTN model, isotropic hardening, fracture strain, and strut diameter on the force displacement curve of a lattice structure fabricated by Selective Laser Melting SLM has been studied using Finite element method The power law of Hollomom has been used to model the isotropic hardening behavior The considered lattice structure is made from AlSi10Mg alloy which has many applications in different industries A20 cm 20 cm 20 cm structure with 5 Body Centered Cubic BCC unit cells in x, y, and z directions has been considered The results show that 250000 elements for one quarter of the lattice structure are quite enough to obtain acceptable results Also the effect of prescribed parameters on the force displacement curve of the lattice structure has been studied Based on the obtained results, diameter and hardening behavior have the most significant effect on maximum force displacement curve among the considered parameters
کلیدواژهها
نویسندگان
Mehran Araghi
PhD Student, Shiraz University, Shiraz
Ali Nayebi
Professor, Shiraz University, Shiraz
Hojjatollah Rokhgireh
Assistant Professor, University of Larestan, Lar
شیوه ارجاع
Araghi, Mehran and Nayebi, Ali and Rokhgireh, Hojjatollah,1398,Mesh Dependency and Parameter Study of GTN Model for a Lattice Structure Fabricated by SLM Considering Hollomom Hardening Using FEM,International Conference on Manufacturing Engineering,Tehran
ارائهشده در
مجموعه مقالات شانزدهمین همایش ملی و پنجمین کنفرانس بین المللی مهندسی ساخت و تولید27 آذر 1398 · تهران