چکیده مقاله
Crude oil based cutting fluids threat the workers' health and the environment due to the production of toxic gases during machining operation and the lack of natural decomposition in the environment and their pollution Vegetable oils as lubricants have many advantages and can be an excellent option to replace petroleum based oils in cutting fluid In this research, the feasibility of replacing 11 common types of vegetable base oils as lubricants in the cutting fluid of turning operation were studied By applying the decision matrix method and TOPSIS algorithm, the most suitable oil to use in cutting fluid with superior properties was identified This study identified castor oil as the best oil to replace cutting oils in machining fluids The confirmatory experiments were performed using castor oil as a lubricant in the cutting fluid to confirm theoretical analysis results The results of cutting force tests show the optimal performance of this oil with an average of 13 41% reduction in cutting force compared to theuse of Z1 oil
کلیدواژهها
نویسندگان
Peyman Jouybar
MSc student in Mechanical Engineering of Biosystem, Agrotechnology Department, University of Tehran, Tehran, Iran
Shahriar Kouravand
Associated Professor in Mechanical Engineering of Biosystem, Agrotechnology Department, University of Tehran, Tehran, Iran
Masoud Dehghani Soufi
Assistant Professor in Mechanical Engineering of Biosystem, Agrotechnology Department, University of Tehran, Tehran, Iran
سید رضا حسن بیگی
Professor in Mechanical Engineering of Biosystem, Agrotechnology Department, University of Tehran, Tehran, Iran
شیوه ارجاع
Jouybar, Peyman and Kouravand, Shahriar and Dehghani Soufi, Masoud and Hassan-Beygi, Seyed Reza,1400,Feasibility of using vegetable-based oils in cutting fluid of turning operation,18th National Conference and 7th International Conference on Manufacturing Engineering in Iran
ارائهشده در
مجموعه مقالات هجدهمین همایش ملی و هفتمین کنفرانس بین المللی مهندسی ساخت و تولید ایران11 اسفند 1400 · تهران