چکیده مقاله
Layering glass/carbon onto resin and alternating their layers is a common method for designing and fabricating laminate composites using thermosetting resins However, these composites still face challenges due to the inherently brittle nature of the polymer matrix In this research, the hypothesis is to enhance the flexibility and mechanical properties of the composite by employing thermoplastic polymers Specifically, low density polyethylene is used, which, after blending with micro/nano carbon based or mineral based materials, undergoes laminating with fiber reinforced fabric layers under high shear forces in a molten polymer state using a two roll calendering machine and Thermoplastic laminate sheets reinforced with particles are produced Subsequently, by investigating the manufacturing process window, including process temperature and composite composition parameters, the thermal properties such as melting point and crystalline state of the samples, as well as the mechanical behavior of the composites, including tensile properties, are examined and the relationship between the structure and properties is determined
کلیدواژهها
نویسندگان
Ali Sharifi
BSc, Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran
Mohammad Zehtab
BSc, Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran
Mehdi Karevan
Associated Prof, Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran
شیوه ارجاع
Sharifi, Ali and Zehtab, Mohammad and Karevan, Mehdi,1402,Feasibility, Fabrication and Mechanical Properties of Micro/Nano Hybrid Thermoplastic Laminate Composites Reinforced Glass Fiber,The 9th International and 20th National Conference on Manufacturing Engineering,Tehran
ارائهشده در
مجموعه مقالات بیستمین همایش ملی و نهمین کنفرانس بین المللی مهندسی ساخت و تولید ایران2 اسفند 1402 · تهران