چکیده مقاله
Metal injection molding of a thin surgical component using a Palm Stearin based SS316L feedstock was investigated The study first determined the optimal solids loading of the feedstock, followed by examining its sensitivity to the shear rate and temperature, to ensure its pseudo plastic behavior After developing the Moldability index, a process window was established based on the experiments to present appropriate injection parameters Using the analysis of variance, the significance and mutual coupling of each parameter was evaluated The study found that the impact of injection speed was greater than other parameters, while holding pressure showed little effect
کلیدواژهها
نویسندگان
Sina Rezaei
Department of Materials Engineering, Science and research branch, Islamic Azad University, Tehran, Iran
Ali Askari
Department of Mechanical Engineering, Karaj Branch, NazarAbad Center, Islamic Azad University, Karaj, Iran
شیوه ارجاع
Rezaei, Sina and Askari, Ali,1402,Influence of the process parameters on the microstructure of the metal injection molded body,The 9th International and 20th National Conference on Manufacturing Engineering,Tehran
ارائهشده در
مجموعه مقالات بیستمین همایش ملی و نهمین کنفرانس بین المللی مهندسی ساخت و تولید ایران2 اسفند 1402 · تهران