چکیده مقاله
In the tube hydroforming THF process, particularly for components with complex geometries like T shaped tubes, the loading path plays a critical role in determining the quality of the final product Inappropriate variations in internal pressure or axial feed can result in defects such as tearing, wrinkling, or incomplete filling of the die cavity Since direct measurement of the loading path is often impractical in industrial applications, it can be estimated using numerical methods based on the geometry of produced samples This study introduces a reverse engineering approach integrated with the multi level response surface method MLRSM to accurately estimate the pressure displacement curve in THF Using ABAQUS software, a finite element FE model of the hydroforming process was developed, with wall thickness variation and protrusion height selected as key output parameters The pressure displacement diagram was treated as a set of design variables, which were optimized through a stepwise, multi level approach to minimize the deviation between the model and the physical sample By refining the variable range at each iteration, the method achieved a precise estimation of the loading path, with an average deviation of less than 5% from the actual wall thickness distribution, demonstrating its effectiveness for industrial applications
کلیدواژهها
نویسندگان
Seyyed Ehsan Eftekhari Shahri
Mechanical Engineering Department, Birjand University of Technology, Birjand
شیوه ارجاع
Eftekhari Shahri, Seyyed Ehsan,1403,Reverse Engineering -Based Approach for Identifying the Loading Curve in Metal Forming,The10th International and 21th National Conference on Manufacturing Engineering,Tehran
ارائهشده در
مجموعه مقالات بیست و یکمین همایش ملی و دهمین کنفرانس بین المللی مهندسی ساخت و تولید ایران6 اسفند 1403 · تهران