مقاله کنفرانسی سال ۱۳۹۵ انگلیسی

Microstructural characterization of Fe-Al composite layers fabricated by plasma spraying and friction stir processing

Microstructural characterization of Fe-Al composite layers fabricated by plasma spraying and friction stir processing

چکیده مقاله

The effects of pass numbers on microstructure of Fe Al hybrid surface composites fabricated via plasma spraying and friction stir processing FSP were investigated Al Fe as sprayed surfaces were subjected to different one to four FSP passes Metallographic examinations and electron backscatter diffraction EBSD were used to analyze themicrostructure of different FSPed zones After applying the second FSP pass, Widm nstatten ferrite plates were formed from recrystallized austenite grains in stir zones SZs and heat affected zones HAZs By increasing the pass numbers, these grains were widened due to increasing the diffusivity of carbon and lengthened due to increasing heat inputs and increasing the microstructure anisotropy by producing more dislocations These grains were widened by increasing the pass numbers, due to increase the diffusivity of carbon and lengthened due to high heat inputs and microstructural anisotropy by producing more dislocations The microstructures of retreating side were also consisted of Widm nstatten ferrite EBSD analysis showed that no specific crystallographic texture was formed in the SZ as a result of FSP

کلیدواژه‌ها

نویسندگان

تصویر Behnoosh Sattari

Behnoosh Sattari

Department of Materials Engineering, Isfahan University of Technology, Isfahan ۸۴۱۵۶ ۸۳۱۱۱, Iran

تصویر Morteza Shamanian

Morteza Shamanian

Department of Materials Engineering, Isfahan University of Technology, Isfahan ۸۴۱۵۶ ۸۳۱۱۱, Iran

تصویر Mehdi Salehi

Mehdi Salehi

Department of Materials Engineering, Isfahan University of Technology, Isfahan ۸۴۱۵۶ ۸۳۱۱۱, Iran

شیوه ارجاع

Sattari, Behnoosh and Shamanian, Morteza and Salehi, Mehdi,1395,Microstructural characterization of Fe-Al composite layers fabricated by plasma spraying and friction stir processing,The second international conference on welding and non-destructive testing, the 17th national conference on welding and inspection, and the sixth national conference on non-destructive testing,Isfahan

ارائه‌شده در

پوستر مجموعه مقالات دومین کنفرانس بین المللی جوشکاری و آزمایش های غیرمخرب، هفدهمین کنفرانس ملی جوش و بازرسی و ششمین کنفرانس ملی آزمایش های غیرمخرب مجموعه مقالات دومین کنفرانس بین المللی جوشکاری و آزمایش های غیرمخرب، هفدهمین کنفرانس ملی جوش و بازرسی و ششمین کنفرانس ملی آزمایش های غیرمخرب30 آذر 1395 · اصفهان
ادامه مسیر پژوهش

مقالات مرتبط

مقاله کنفرانسی سال ۱۳۹۵ ۱,۵۲۲ مشاهده

بررسی اثر شدت جریان بر خواص مکانیکی فولاد ST37 در جوشکاری مقاومتی سربه سر در فشار ثابت

کلیه روشهای جوشکاری مقاومتی بر این اساس استوار هستند که با عبور جریان الکتریکی از فلز، مقاومت فلز در برا…

فولاد ST37جریان جوشکاریاستحکام کششی.
مقاله کنفرانسی سال ۱۳۹۵ ۱,۴۴۷ مشاهده

اثر متغیر های جوشکاری برسختی و خواص سایشی آلیاژهای روکش سخت استلایت 6 و 12 بر روی فولادزنگ نزن مارتنزیتی 410

تحقیق از آلیاژهای پایه کبالت استلایت 6 3 و 12 جهت روکش سخت 4روی سطح فولادزنگ نزن مارتنزیتی کوئینچ و تمپر…

کبالتاستلایتروکش سخت
مقاله کنفرانسی سال ۱۳۹۵ ۱,۴۳۲ مشاهده

بررسی ساختار میکروسکوپی و خواص مکانیکی ناحیه متاثر از حرارت جوش فولاد کم آلیاژ فوق مستحکم DIN1.6959 روکش کاری شده با سوپر آلیاژ اینکونل 625

فولاد کم آلیاژ فوق مستحکم DIN 1 6956 35NiCrMoV123 دارای کاربردهای فراوانی در صنایع ساخت تسلیحات نظامی نظ…

اینکونل 625فولاد DIN 1.6959(35NiCrMoV123)فرایند TIG
مقاله کنفرانسی سال ۱۳۹۵ ۱,۳۸۵ مشاهده

بررسی خوردگی خستگی ناحیه جوش فولاد HSLA-100 در محیط آب دریا

فولاد HSLA 100 جزو خانواده فولادهای کم آلیاژ استحکام بالا می باشد و ورقهای فولادی از این جنس دارای ساختا…

خوردگی خستگیفولاد HSLA-100GMAW
مقاله کنفرانسی سال ۱۳۹۵ ۱,۲۷۹ مشاهده

بررسی تاثیر مقدار نیکل و مولیبدن بر ریزساختار و خواص مکانیکی فولاد ASTM-A516 جوشکاری شده به روش SMAW

در این تحقیق اثر مقدار نیکل و مولیبدن بر ریزساختار و خواص مکانیکیآلیافلز جوش فولاد کم ژ A516 ASTMروبررسی…

نیکلمولیبدنSMAW
مقاله کنفرانسی سال ۱۳۹۵ ۱,۱۸۶ مشاهده

ارزیابی تنش پسماند در جوشکاری مقاومتی نقطه ای به روش پراش پرتو ایکس در ورق فولاد St 52

جوشکاری مقاومتی نقطهای که در اتصالات ورق، محصولات خانگی و بدنه خودرو از مهمترین فرایندهای اتصال بشمار می…

تنش پسماندجوشکاری مقاومتیفولاد St52