مقاله کنفرانسی سال ۱۳۹۹ انگلیسی

Investigating the effect of heat input on mechanical properties and microstructural in dissimilar joint between A283 Gr C steel and 304L stainless steel in SMAW welding methods

Investigating the effect of heat input on mechanical properties and microstructural in dissimilar joint between A283 Gr C steel and 304L stainless steel in SMAW welding methods

چکیده مقاله

In this research, the effect of heat input on the microstructure and mechanical properties of 304L stainless steel connection to A283 grade C plain carbon steel has been investigated by shielded metal arc welding method E 309L electrode was used for this purpose In order to investigate the microstructure and mechanical properties of the weld metal, heat affected zone and the base metal, macrographic, metallographic, microhardness and uniaxial tensile tests were performed The results showed that due tothe increase in heat input, the depth and penetration of the weld metal is less affected and in the first place the width of the welding line increases The tensile test obtained from the samples showed that with increasing the heat input, the final strength and ductility of the samples decreased due to grain growth in the areas around the weld metal Also, with increasing the heat input, the hardness of the weld metal area and the hardness of the heat affected area decreased due to grain growth and the formation of delta ferrite phase in the area affected by the heat of the base metal 304L In contrast, as the heat input decreased, black holes were observed in the junction of the base metal side of the A283 base, which were caused by a lack of melting and reduced heat

کلیدواژه‌ها

نویسندگان

تصویر Negar Pakdaman

Negar Pakdaman

Master of Welding Materials Engineering, Isfahan University of Technology

شیوه ارجاع

Pakdaman, Negar and Atapour, Masoud and Esmaeilzade, Mojtaba,1399,Investigating the effect of heat input on mechanical properties and microstructural in dissimilar joint between A283 Gr C steel and 304L stainless steel in SMAW welding methods,3rd International Conference on Welding and Non-Destructive Testing of Iran, 21st National Conference on Welding and Inspection and 10th National Conference on Non-Destructive Testing,Isfahan

ارائه‌شده در

پوستر مجموعه مقالات سومین کنفرانس بین المللی جوشکاری و آزمایش های غیرمخرب ایران، بیست و یکمین کنفرانس ملی جوش و بازرسی و دهمین کنفرانس ملی آزمایش های غیرمخرب مجموعه مقالات سومین کنفرانس بین المللی جوشکاری و آزمایش های غیرمخرب ایران، بیست و یکمین کنفرانس ملی جوش و بازرسی و دهمین کنفرانس ملی آزمایش های غیرمخرب13 اسفند 1399 · اصفهان
ادامه مسیر پژوهش

مقالات مرتبط

مقاله کنفرانسی سال ۱۳۹۹ ۱,۴۳۴ مشاهده

کاربرد روش طراحی آزمایش تاگوچی در جوشکاری

روش تاگوچی توسط محققی به نام جنيچی تاگوچی جهت بهینه سازی فرآیند ها توسعه داده شد روش معمول انجام آزمایشه…

جوشکاریطراحی آزمایش تاگوچی.طراحی آزمایش تاگوچی
مقاله کنفرانسی سال ۱۳۹۹ ۱,۱۷۸ مشاهده

اتصال غیرمشابه آلیاژ تیتانیوم Ti6Al4V به آلیاژ آلومینیوم Al6061 به روش فاز مایع گذرا

آلیاژهای تیتانیم و آلومینیم به علت خواص جذابی مانند چگالی پایین، مقاومت خوردگی خوب و استحکام مناسب کاربر…

تیتانیمTi6Al4VAl6061
مقاله کنفرانسی سال ۱۳۹۹ ۹۹۵ مشاهده

ارزیابی تنش زدایی آلتراسونیک در جوشکاری GTAW و خوردگی تحت تنش (SCC) در فولاد زنگ نزن L 316 و مقایسه آن با روش حرارتی

جوشکاری به روش قوس تنگستنی GTAW از فرایند های پرکاربرد جوشکاری محسوب میشود که فلز جوش ممکن است با خوردگی…

خوردگی تنشیتنش زدایی آلتراسونیکتنش زدایی حرارتی
مقاله کنفرانسی سال ۱۳۹۹ ۹۸۵ مشاهده

مطالعه EBSD و شبیه سازی تنش های پسماند در اتصال غیرمشابه فاز مایع گذار فولاد زنگ نزن دوفازی 220 SAF به سوپر آلیاژ اینکونل 750-X

در این پژوهش، اتصال غير مشابه فولاد زنگ نزن دوفازی 2205 SAF به سوپر آلیاژ اینکونل 750 X توسط فرآیند فاز…

اینکونل 750-Xاستحکام کششی برشیفاز مایع گذرا
مقاله کنفرانسی سال ۱۳۹۹ ۹۶۷ مشاهده

بررسی افزایش استحکام الکترود, با رویکرد کاهش عملیات درسینگ در تغییرعناصرآلیاژی الکترود مورد استفاده در تولید بدنه خودروی پارس تندر

جوشکاری مقاومتی نقطه ای از مهمترین روش های جوشکاری بدنه خودروها می باشد در بدنه خودروها ورق های فولادی گ…

بدنه خودروفرآیند درسکاری الکترودسره موثر الکترود
مقاله کنفرانسی سال ۱۳۹۹ ۹۵۱ مشاهده

بررسی ریز ساختار نمونه فولاد زنگ نزن 316 کم کربن ساخته شده به روش رسوب مستقیم فلز

هدف از این پژوهش مشخصه یابی ریزساختار، عیوب و سختی نمونه فولاد زنگ نزن 316 کم کربن است که از روش رسوب مس…

ریزساختارروش رسوب مستقیم فلزفولاد زنگ نزن 316