مقاله کنفرانسی سال ۱۴۰۰ انگلیسی

Effect heat input of GTAW process on the microstructure and fracture toughness of weld metal in API 5LX90 steel

Effect heat input of GTAW process on the microstructure and fracture toughness of weld metal in API 5LX90 steel

چکیده مقاله

In this study, the effect of GTAW process input heat on the microstructure of fracture toughness of API 5L X90 micro alloy steel fittings using ER120S G filler metal in three different inlet temperatures of 1 506, 1 674 and 1 841 kJ Was examined in mm Optical microscope and SEM electron microscope were used for microstructural studies Microstructural studies showed that the base metal microstructure consisted of ferrite and granular bainite and it was found that the weld metal included needle ferrite, polygonal ferrite and martensite / austenite MA islands It was found that the amount of needleferrite decreases with increasing inlet temperature The toughness of base metal and weld metals was determined by Sharpe impact test The results of Sharpe impact test showed that at ambient temperature, weld metal with high inlet heat has the highest fracture toughness Be And at 20 ° C, the base metal had the highest fracture toughness compared to the weld metal; And by increasing the inlet heat, the fracture toughness of the weld metal decreases

کلیدواژه‌ها

GTAW microstructure API-5L X90 weld metal fracture toughness. heat input API 5L X90 fracture toughness

نویسندگان

تصویر Jasem Savari

Jasem Savari

Master student, Department of Materials Engineering, Faculty of Engineering, Shahid Chamran University of Ahvaz Ahvaz, Iran

تصویر Reza Dehmolaei

Reza Dehmolaei

Assistant Professor, Department of Materials Science & Engineering, Faculty of Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran

شیوه ارجاع

Savari, Jasem and Dehmolaei, Reza and Tavakoli Shoushtari, Mohammad Reza,1400,Effect heat input of GTAW process on the microstructure and fracture toughness of weld metal in API 5LX90 steel,4th International Conference on Welding and Non Destructive Testing & 22nd National Conference on Welding & Inspection & 11th National Conference on NDT,Isfahan

ارائه‌شده در

پوستر مجموعه مقالات چهارمین کنفرانس بین المللی جوشکاری و آزمایش های غیرمخرب و بیست و دومین کنفرانس ملی جوش و بازرسی و یازدهمین کنفرانس ملی آزمایش های غیرمخرب مجموعه مقالات چهارمین کنفرانس بین المللی جوشکاری و آزمایش های غیرمخرب و بیست و دومین کنفرانس ملی جوش و بازرسی و یازدهمین کنفرانس ملی آزمایش های غیرمخرب18 اسفند 1400 · اصفهان
ادامه مسیر پژوهش

مقالات مرتبط

مقاله کنفرانسی سال ۱۴۰۰ ۱,۲۸۱ مشاهده

ارزیابی ریسک فرایند جوشکاری و برشکاری با رویکرد FMEA فازی

بدون تردید مدیریت ریسک، مهم ترین ماموریت نظام مدیریت ایمنی در صنایع می باشد ریسک همواره با عدم قطعیت همر…

ارزیابی ریسکفازیجوشکاری
مقاله کنفرانسی سال ۱۴۰۰ ۱,۰۳۶ مشاهده

آزمون های غیر مخرب در صنعت خودروسازی

نظر به اهمیت بالای کیفیت و صحت عملکرد قطعات و اجزاء خودرو در حصول اطمینان از کارایی و ایمنی خودروی تولید…

خودروUTMT
مقاله کنفرانسی سال ۱۴۰۰ ۹۵۵ مشاهده

تکنیک دودیواره دو تصویر برای لوله های با سایز بسیار کم برای ارزیابی مکان عیوب و حساسیت در جوش لب به لب لوله

در این تحقیق لوله های زیر اینچ هیدرولیک ۰/۵ و ۰/۷۵ اینچ با جنس ۱/۰۳۰۸ را در واحد فولادسازی پس از جوشکاری…

لولهآزمون پرتونگاریجوش
مقاله کنفرانسی سال ۱۴۰۰ ۸۰۳ مشاهده

انحلال ذرات کاربید تنگستن (WC) حین ایجاد لایه سخت جوشکاری و تاثیر آن بر مقاومت سایشی لایه کامپوزیتی WC/Ni

در پژوهش حاضر تاثیر انحلال ذرات کاربید تنگستن WC ناشی از شرایط مختلف پیش گرم نمودن قطعات قبل از جوشکاری…

ذرات پودری WCانحلال ذرات کاربید تنگستنتشکیل فاز ترد C۲W
مقاله کنفرانسی سال ۱۴۰۰ ۷۹۳ مشاهده

جوشکاری نقطه ای مقاومتی فولادهای پیشرفته در خودرو سازی

امروزه فراین د جوشکاری مقاومتی نقطه ای یکی از مهم ترین مراحل ساخت خودروها بشمار می رود افزایش ایمنی و سب…

ایمنیسبکیسوخت
مقاله کنفرانسی سال ۱۴۰۰ ۷۶۶ مشاهده

بررسی اثر زمان و دمای پیشگرم روی خواص مکانیکی منطقه متاثر از حرارت جوشکاری به روش GMAW/GTAW ، اتصال آلیاژ ۱.۷۲۲۵ (M۰۴۰) به St۳۷

اتصال فلزات غیرهمجنس یکی از مهم ترین الزامات صنایع مختلف است اتصال فولادهای آلیاژی و ساده کربنی به طور م…

مدت زمان پیشگرمدما پیشگرماتصال فلزات غیر همجنس