چکیده مقاله
This study presents an appropriate welding filler to join dissimilar aluminum alloys AA6061 and AA5083 using the tungsten inert gas TIG process The TIG welding of AA6061 and AA5083 was butt joined with three different fillers: ER5356, ER4043 and ER5183 The experiments were conducted in order to investigate the mechanical properties The effects of the different fillers used on the weld joints were analyzed by their visual appearance, hardness and strength It was found that welding by using filler ER5356 produced the highest ultimate tensile strength of 175 MPa compared to the weld joints using fillers ER4043 and ER5183 with values of 167 MPa and 166 MPa, respectively It can be concluded that TIG welding using the ER5356 filler yields better joint compared to ER4043 and ER5183
کلیدواژهها
نویسندگان
Ebrahim Hoseynipanah
Mechanical Department, Isfahan University of Technology, Isfahan, Iran
Ghasem Azimi Roeen
Assistant professor, Center of Engineering and Technical Skills Training, Isfahan University of Technology, Isfahan, Iran
شیوه ارجاع
Hoseynipanah, Ebrahim and Azimi Roeen, Ghasem,1400,Effect of filler on mechanical properties of tungsten inert gas welded joint of dissimilar aluminum alloys,4th International Conference on Welding and Non Destructive Testing & 22nd National Conference on Welding & Inspection & 11th National Conference on NDT,Isfahan
ارائهشده در
مجموعه مقالات چهارمین کنفرانس بین المللی جوشکاری و آزمایش های غیرمخرب و بیست و دومین کنفرانس ملی جوش و بازرسی و یازدهمین کنفرانس ملی آزمایش های غیرمخرب18 اسفند 1400 · اصفهان