چکیده مقاله
Due to the use similar welding of Corten A weathering steel and dissimilar welding of Corten A weathering steel with St12 plain carbon steel in industry, the joints in the welding area were investigated The metal arc welding method with carbon dioxide shielding gas, which is used in many cases in industry used for present work The welding process included current and voltage control, welding wire injection rate, shielding gas rate, welding speed, connection configuration and microstructure The mechanical properties and microstructure of the weld zone of similar and disimilar joints of Corten A weathering steel were evaluated by tensile, bending, hardness, metallographic and radiographic tests The results showed that in the studies, the microstructure of the weld zone in similar and disimilar joints includes grainboubdry ferrite, needle ferrite and WitmannStatten ferrite The tensile strength of the similar jointwas measured to be 497 MPa and the disimilar joint was measured to be 303 MPa Weld zone hardness was measured 210 Vickers at similar joints and 180 Vickers at disimilar joints In conclude, similar welding is superior to , disimilar welding in terms of strength and hardness of the weld zone
کلیدواژهها
نویسندگان
شیوه ارجاع
Vatandoost, Mehrdad and Mohammadi Zahrani, Ehasan and Beidokhti, Behrooz and davoodi, Ali,1400,Microstructure and mechanical properties of the welding zone in the Corten A to St12 joint by arc welding with shielded carbon dioxide,4th International Conference on Welding and Non Destructive Testing & 22nd National Conference on Welding & Inspection & 11th National Conference on NDT,Isfahan
ارائهشده در
مجموعه مقالات چهارمین کنفرانس بین المللی جوشکاری و آزمایش های غیرمخرب و بیست و دومین کنفرانس ملی جوش و بازرسی و یازدهمین کنفرانس ملی آزمایش های غیرمخرب18 اسفند 1400 · اصفهان