مقاله کنفرانسی سال ۱۴۰۱ انگلیسی

Investigating the microstructure and mechanical properties of pulsedNd:YAG laser welding of Monel 400 to Nimonic 75

Investigating the microstructure and mechanical properties of pulsedNd:YAG laser welding of Monel 400 to Nimonic 75

چکیده مقاله

In this study, non homogenous welding of nimonic 75 superalloy to Monel 400 with 1mm thickness was investigated with pulsed Nd:YAG laser welding The mechanicalproperties of the joint were analyzed with optical and scanning electron microscope, Xray diffraction, micro hardness test and tensile test In the case of non homogeneouswelding of Nimoinc 75 superalloy to Monel 400, defects such as liquation cracks andporosity in the welded samples were observed these defects were removed withincreasing the preheating temperature and decreasing the heat input The results showedthe voltage, pulse width, pulse frequency and welding speed should be selected as 500volts, 9 milliseconds, 3 Hz and 0 9 mm/s respectively to reach the proper penetrationdepth Also, the investigations show that the welding structure is composed of austeniticmatrix containing columnar dendrites and some cellular areas The mechanical propertiesof the weld metal were reduced after joining and segregation causes a change in theamount of elements and the appearance of intermetallic compounds in the spacesbetween dendrites and cells All non homogeneous samples broke during the tensile testfrom the weld metal area

کلیدواژه‌ها

نویسندگان

تصویر Ramin Mahdizadeh

Ramin Mahdizadeh

School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran,

تصویر Said Mehdipour

Said Mehdipour

School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran

شیوه ارجاع

Mahdizadeh, Ramin and Akbari Musavi, Seyed Ali Asghar and Mehdipour, Said,1401,Investigating the microstructure and mechanical properties of pulsedNd:YAG laser welding of Monel 400 to Nimonic 75,5th International Conference on Welding and Non Destructive Testing & 23rd National Conference on Welding & Inspection & 12th National Conference on NDT,Isfahan

ارائه‌شده در

پوستر مجموعه مقالات پنجمین کنفرانس بین المللی جوشکاری و آزمایش های غیرمخرب،بیست و سومین کنفرانس ملی جوش و بازرسی و دوازدهمین کنفرانس ملی آزمایش های غیرمخرب و اولین کنفرانس ملی ساخت افزایشی مجموعه مقالات پنجمین کنفرانس بین المللی جوشکاری و آزمایش های غیرمخرب،بیست و سومین کنفرانس ملی جوش و بازرسی و دوازدهمین کنفرانس ملی آزمایش های غیرمخرب و اولین کنفرانس ملی ساخت افزایشی10 اسفند 1401 · اصفهان
ادامه مسیر پژوهش

مقالات مرتبط

مقاله کنفرانسی سال ۱۴۰۱ ۱,۰۵۶ مشاهده

بهبود کیفیت نقاط جوش بدنه خودروی کوییک با بهبود نوسان جریان برق ،اصلاحپارامتر گانها ، استفاده از آزمون های مخرب و غیر مخرب

ایمنی خودرو رابطه مستقیمی با کیفیت نقاط جوش خودرو دارد که با توجه به آمار بسیار زیاد تلفات جاده ای در ای…

استحکام جوشبدنه خودروی کوئیکشاخص کیفی ایرادات جوش بدنه کوییک NQS
مقاله کنفرانسی سال ۱۴۰۱ ۹۳۸ مشاهده

ریز ساختار و خواص مکانویکی اتصال غیر همجنس آلومینیوم ۱۰۵۰ به فولاد زنگ نزن ۳۱۶L در جوشکاری همزن اصطکاکی

جوشکاری همزن اصطکاکی یکی از روش های جوشکاری حالت جامد است که امروزه برای اتصال انواع مواد، به ویژه فلزات…

جوشکاری همزن اصطکاکیترکیب بین فلزیاتصال غیر همجنس
مقاله کنفرانسی سال ۱۴۰۱ ۸۶۶ مشاهده

بررسی ریز ساختار و رفتار خوردگی داغ اتصال TLP سوپر آلیاژ Hastelloy X

در این پژوهش اتصال فاز مایع گذرای سوپر آلیاژ هستالوی X با استفاده از لایه واسط BNi ۲ انجام شد بررسی ریز…

ریز ساختارخوردگی داغاتصال فاز مایع گذرا
مقاله کنفرانسی سال ۱۴۰۱ ۸۴۱ مشاهده

کنترل ریزساختار و ترک های انجمادی در فرایند ساخت افزایشی ذوب لیزری بستر پودر آلیاژهای آلومینیوم استحکام بالا

فناوری های ساخت افزایشی فلزات به عنوان یکی از ارکان مهم انقلاب صنعتی چهارم، رویکردی تحول آفرین در ساخت د…

ساخت افزایشیآلومینیومترک انجمادی
مقاله کنفرانسی سال ۱۴۰۱ ۷۳۲ مشاهده

شبیه سازی ترمومکانیکی فرایند جوشکاری اصطکاکی دورانی با استفاده از نرم افزار آباکوس

جوشکاری اصطکاکی دورانی یکی از مهم ترین فرایندهای جوشکاری حالت جامد است که برای اتصال لوله ها و میله های…

تکنیک اجزای محدودآباکوساینکونل ۷۱۸
مقاله کنفرانسی سال ۱۴۰۱ ۷۳۰ مشاهده

بررسی ریزساختار انجمادی سوپرآلیاژ LC ۷۱۳ Inconelبازسازی شده توسط ۶۲۵ Inconel با روش رسوب نشانی مستقیم لیزری

روکش کاری لیزری از منبع حرارتی لیزر برای نشاندن لایه ای نازک روی فلز پایه بهره می گیرد حرارت ورود بسیار…

اینکونل ۷۱۳LCاینکونل ۶۲۵ساخت افزایشی