چکیده مقاله
Aluminum matrix composites are very common engineering materials in automotive, aerospace and other application due to their low weight, high strength, and excellent wear resistance In this work, different amount of zircon ceramic particles ZrSiO4 were incorporated in A356 1 aluminum alloy by stir casting route Processing temperature was 750C This method was in order to achieve homogeneous composite material and better solidification conditions SEM micrographs show that reinforcing particles were dispersed homogeneously in the samples not clustered The hardness and tensile strength of zircon reinforced aluminum were higher than those of the monolithic aluminum The hardness and tensile strength were decreased with zircon amount increasing above 5 vol %
کلیدواژهها
نویسندگان
K Shirvani Moghaddam
M Sc Azad University of South Tehran, Tehran, Iran
H. R. Baharvandi
Phd School of Metallurgy and Materials Engineering University of Tehran, Tehran, Iran
H Abdizadeh
Phd Malek Ashtar University of Technology, Tehran, Iran
V Vakili
student School of Metallurgy and Materials Engineering University of Tehran, Tehran, Iran
شیوه ارجاع
Shirvani Moghaddam, K and Baharvandi, H. R. and Abdizadeh, H and Vakili, V,1386,Microstructural Characterization and Modeling of Discontinuously Reinforced Al-matrix Composite,02nd Tehran International Congress on Manufacturing Engineering (TICME2007),Tehran
ارائهشده در
مجموعه مقالات دومین کنفرانس بین المللی و هشتمین کنفرانس ملی مهندسی ساخت و تولید10 اسفند 1386 · تهران