چکیده مقاله
Friction stir welding FSW is a solid state welding process which has been successfully applied in several industries such as aerospace and automotive for joining materials The friction stir tool is the key element in FSW process In this study, the influence of four different tool pin geometries on tensile strength of two types of polypropylene composite plates with 30% glass fiber GF and 30% carbon fiber CF have been investigated For this purpose four different stir pins namely threaded taper pin, square pin, four flute threaded pin and threaded taper pin with chamfer were made and used to carry out butt welding of 5 mm thick plates Standard tensile tests were performed to evaluate the tensile strength of the welded specimens The results indicated that threaded taper pin with chamfer produced welds with better surface appearance and higher tensile strength It was also found that with this tool, the tensile strength of the specimens for GF composite and CF composite were about 30% and 34% that of the base materials respectively
کلیدواژهها
نویسندگان
F. kordestani
PG student, Faculty of Mechanical Eng , Shahid Rajaee Teacher Training University, Tehran
N.B. Mostafa Arab
Assist Prof , Faculty of Mechanical Eng , Shahid Rajaee Teacher Training University, Tehran
F. Ashenai Ghasemi
Assist Prof , Faculty of Mechanical Eng , Shahid Rajaee Teacher Training University, Tehran
R. Eslami Farsani
PG student, Faculty of Mechanical Eng , Shahid Rajaee Teacher Training University, Tehran
شیوه ارجاع
kordestani, F. and Mostafa Arab, N.B. and Ashenai Ghasemi, F. and Eslami Farsani, R.,1390,Experimental Investigation of Pin Geometry Influence on Tensile Strength of Friction Stir Welds in Polypropylene Composites,12th Iranian Conference on Manufacturing Engineering (ICME 2010),Tehran
ارائهشده در
مجموعه مقالات دوازدهمین کنفرانس ملی مهندسی ساخت و تولید ایران6 دی 1390 · تهران