چکیده مقاله
Bulge forming process is mainly utilized in producing slit less lightweight parts with high strength The main objective in the present study is to investigate the effects of different process parameters on axial forces and the bulge height as well as the variation in tube thickness The investigated parameters were including as die corner radius, tube initial thickness and the friction coefficient between the tube, die and the polyurethane rod To evaluate the effects of defined parameters, the bulge forming process specified for copper tube with polyurethane rod, was simulated using finite element method To validate the simulation results, some experiments were carried out and the practical results were compared with simulation results The comparison of the results demonstrated adequate accuracy of the simulation results In the following, the effects of defined parameters on axial forces, bulge height and tube thickness variations were analyzed
کلیدواژهها
نویسندگان
M Kalantari
Department of Mechanical Engineering, Iran University of Science and Technology, Tehran ۱۶۸۴۴, Iran
M Salem
Department of Mechanical Engineering, Isfahan University of Technology, Isfahan ۸۴۱۵۶, Iran
M Haddadzade
Department of Mechanical Engineering, Amirkabir University of Technology, Tehran ۱۵۹۱۴, Iran
شیوه ارجاع
Kalantari, M and Salem, M and Haddadzade, M,1390,Experimental and numerical investigation of bulge forming of copper T-form tubes,12th Iranian Conference on Manufacturing Engineering (ICME 2010),Tehran
ارائهشده در
مجموعه مقالات دوازدهمین کنفرانس ملی مهندسی ساخت و تولید ایران6 دی 1390 · تهران