مقاله کنفرانسی سال ۱۳۹۰ انگلیسی

Functionalised Plasma Polymer Nano-thin Films: Potential Application in Water Purification

Functionalised Plasma Polymer Nano-thin Films: Potential Application in Water Purification

چکیده مقاله

In recent years, surface functionalised materials have attracted considerable interest as adsorbent agents in water purification Although surface modification of materials using wet chemistry routes has previously been employed for water purification, applying plasma polymerizations technology in this field appears to be a more cost efficient and effective alternative In this novel technology, an organic monomer gas containing specific functional groups is excited into the plasma state within a rotating plasma reactor containing substrate particles The monomer is fragmented into active species via plasma state interactions and is deposited on all surfaces within the reaction chamber In water, some functional groups are negatively charged, while others are charged positively Therefore, by choosing the appropriate functional groups for polymerization, both anionic and cationic pollutants can be removed via electrostatic attractions This article begins with reviewing the basic concepts of nano thin film manufacturing using plasma polymerization technology and continues with reviewing the potential application of this technology in developing a new class of adsorbent materials for water purification

کلیدواژه‌ها

نویسندگان

تصویر B Akhavan

B Akhavan

School of Advanced Manufacturing and Mechanical Engineering, Mawson Institute, University of South Australia, Adelaide, Australia

تصویر K Jarvis

K Jarvis

School of Advanced Manufacturing and Mechanical Engineering, Mawson Institute, University of South Australia, Adelaide, Australia

تصویر P Majewski

P Majewski

School of Advanced Manufacturing and Mechanical Engineering, Mawson Institute, University of South Australia, Adelaide, Australia

شیوه ارجاع

Akhavan, B and Jarvis, K and Majewski, P,1390,Functionalised Plasma Polymer Nano-thin Films: Potential Application in Water Purification,12th Iranian Conference on Manufacturing Engineering (ICME 2010),Tehran

ارائه‌شده در

پوستر مجموعه مقالات دوازدهمین کنفرانس ملی مهندسی ساخت و تولید ایران مجموعه مقالات دوازدهمین کنفرانس ملی مهندسی ساخت و تولید ایران6 دی 1390 · تهران
ادامه مسیر پژوهش

مقالات مرتبط

مقاله کنفرانسی سال ۱۳۸۹ ۶,۹۲۸ مشاهده

اندازه گیری تنش پسماند به روش غیر مخرب امواج التراسونیک

در این مقاله اندازه گیری تنش پسماند در جوش لب به لب دو ورق غیر همجنس به روش التراسونیک بررسی شدهاست در ح…

امواج التراسونیک تنش پسماند آکستو الاستیسیته جوشکاری
مقاله کنفرانسی سال ۱۳۸۹ ۶,۱۷۹ مشاهده

طراحی و ساخت یاتاقان مغناطیسی فعال برای کار در دور دوم 5000rpm

دراین مقاله یک یاتاقان مغناطیسی فعال Active Magnetic Bearing برای تعلیق یک روتور توخالی در سرعت 5000 دور…

یاتاقان مغناطیسی فعالفرکانس نمونه برداریکنترلر پیشفاز
مقاله کنفرانسی سال ۱۳۸۹ ۵,۸۹۷ مشاهده

اندازه گیری تنش پسماند به روش استاندارد پراش اشعه ایکس در ورق جوش سردنورد شده آلومینیوم و مس و مقایسه با روش اجزاء محدود

در این مقاله با استفاده از روش استاندارد پراش اشعه ایکس، تنش پسماند سطح آلومینیومی در ورق نوردی دولایه ج…

تنش پسماند روش استاندارد پراش اشعه ایکس شبیه سازی اجزاء محدود جوش سرد نوردی
مقاله کنفرانسی سال ۱۳۸۹ ۵,۰۶۵ مشاهده

چیدمان بهینه تجهیزات در یک کارگاه تولیدی با استفاده از روش تکنولوژی گروهی

امروزه در بخش عمده از کارخانجات تولیدی نوع چیدمان تجهیزات بصورت سنتی می باشد که دارای عیوب فراوانی است د…

جریان تولیدتکنولوژی گروهیطبقه بندی شاخه ای
مقاله کنفرانسی سال ۱۳۹۰ ۴,۳۲۷ مشاهده

بررسی انرژی مخصوص تراش و نیروهای حاصل از تغییر پارامترهای ماشینکاری در تراشکاری آلیاژ Al2014 به کمک نرم افزار DEFORM و دینامومتر

آلیاژ Al2014 یکی از آلیاژهای پرکاربرد صنایع هوایی است و تولید بهینه این جنس قطعات همیشه از اهداف مهندسین…

انرژی مخصوصنیروهای ماشینکارینرمافزار DEFORM
مقاله کنفرانسی سال ۱۳۸۹ ۴,۱۹۸ مشاهده

بررسی مقایسه ای روش اکتیو تیگ (A-TIG) با روش TIG مرسوم در جوشکاری فولاد زنگ نزن 316L

جوشکاری با الکترود تنگستنی تحت حفاظت گاز خنثی TIG یکی از روشهای خوب برای دستیابی به جوشی با درجه بالایی…

عمق نفوذاکتیو تیگفولاد زنگ نزن 316L