چکیده مقاله
This paper investigates the effect of friction stir welding FSW speed on the microstructure and mechanical properties of 430 ferritic stainless steel Stainless steel sheets with 2 mm thickness were welded by FSW A WC base tool was used at different welding speeds of 150, 200, and 250 mm/min The microstructure and mechanical properties examination were conducted by optical microscopy, microhardness, and tensile tests The microstructural observation showed that the structure in the stir zones of the welds is too refined, and the average grain size is decreased from 29 to 1 2 μm An increase in welding speed results in a slightly grain refining of SZ, due to a decrease in weld heat input The microhardness profile revealed the maximum hardness of SZ in compare with other weld area In addition, the tensile tests showed that in all welding speeds, except 250 mm/min, the fracture occurred in the base metals
کلیدواژهها
نویسندگان
F. Kargar
Department of Materials Engineering, Tarbiat Modares University, Tehran, Iran
A. Abdollah-zadeh
Department of Materials Engineering, Tarbiat Modares University, Tehran, Iran
T. Saeid
Faculty of Materials Engineering, Sahand University of Technology, Tabriz, Iran
M. Jafarzadegan
Department of Materials Engineering, Tarbiat Modares University, Tehran, Iran
شیوه ارجاع
Kargar, F. and Abdollah-zadeh, A. and Saeid, T. and Jafarzadegan, M.,1390,Microstructure and Mechanical Properties of Friction Stir Welded 430 Stainless Steel,12th Iranian Conference on Manufacturing Engineering (ICME 2010),Tehran
ارائهشده در
مجموعه مقالات دوازدهمین کنفرانس ملی مهندسی ساخت و تولید ایران6 دی 1390 · تهران