چکیده مقاله
Spur dikes are used to protect river banks from erosion and also keep the main channel navigable These structures are built from the river bank into the stream flow and usually they are built in group A spur dike may be submerged during the flood conditions or to be exposed during the low flow Spur dikes may be classified into two types: impermeable and permeable Present paper illustrates results of numerical study on flow field around a series impermeable and non submerged spur dikes with the vertical attitude to the flow axes In this study the CFD program namely FLOW 3D has been used to simulate the flow field around the spur dikes In additions, several turbulence models have been applied in order to achieve the best numerical simulation Finally longitudinal, transverse and vertical component of flow velocity, velocity vectors and streamlines caused by numerical simulation were compared to experimental results Achieved results can prove that Flow pattern simulation around the spur dikes could be done by FLOW 3D numerical modeling, very well
کلیدواژهها
نویسندگان
Hossein Basser
M Sc graduate of Hydraulic Engineering, Amirkabir University of Technology
Abdollah Ardeshir
Associate Professor, Amirkabir University of Technology
Hojat karami
Hossein Basser M.Sc. graduate of Hydraulic Engineering, Amirkabir University of TechnologyAbdollah Ardeshir Associate Professor, Amirkabir University of Technology
شیوه ارجاع
Basser, Hossein and Ardeshir, Abdollah and karami, Hojat,1391,Numerical simulation of flow pattern around spur dikes series in rigid bed,9th International Congress on Civil Engineering,Isfahan
ارائهشده در
مجموعه مقالات نهمین کنگره بین الملی مهندسی عمران19 اردیبهشت 1391 · اصفهان