مقاله کنفرانسی سال ۱۳۹۶ انگلیسی

Aperture Back Calibration through DFN for Stochastic Discontinuum Modeling of Groundwater Inflow into Underground Excavations

Aperture Back Calibration through DFN for Stochastic Discontinuum Modeling of Groundwater Inflow into Underground Excavations

چکیده مقاله

Prediction and modeling of groundwater inflow into underground excavations is one of the most important and challenging issues faced by hydrogeologists This paper presents a framework for direct utilization of discrete fracture network DFN with calibrated hydraulic aperture for stochastic discontinuum modeling and uncertainty analysis of groundwater inflow into underground excavations The stochastic discontinuum modeling of groundwater inflow into the underground excavation was performed by FNETF computational code that established for discrete fracture flow analysis The main input data for stochastic discontinuum modeling of groundwater inflow into underground excavation i e geometrical properties of fractures and groundwater state were captured from site investigations and measurements in Siah Bisheh pumped storage project at the North of Iran Detailed measurements of groundwater inflow into powerhouse and transformer caverns PHC and TC, respectively provide an opportunity to determine the hydraulic aperture the remaining input data for performing stochastic discontinuum method through back calibration To reach this goal, about 40 different mean hydraulic apertures ranging from 0 04 mm to 0 12 mm were considered in the back calibration procedure Finally, the validity of calibrated hydraulic aperture was explored by simulation results of the groundwater inflow into TC The results of this study indicate that the measured groundwater inflow into TC are in the range of calculated mean value plus minus standard deviation With regard to this correspondence, it can be concluded that stochastic discontinuum method with DFN realizations including the calibrated hydraulic aperture is suitable to predict the groundwater inflow into the the underground excavations

کلیدواژه‌ها

FNETF Discrete Fracture Flow Stochastic discontinuum DFN application Hydraulic aperture back calibration

نویسندگان

تصویر Kourosh Shahriar

Kourosh Shahriar

Department of Mining & Metallurgical Eng , Amirkabir University of Technology, Tehran, Iran

تصویر Sharbanou Sayadi

Sharbanou Sayadi

Department of Mining & Metallurgical Eng , Amirkabir University of Technology, Tehran, Iran

شیوه ارجاع

Javadi, Morteza and Sharifzadeh, Mostafa and Shahriar, Kourosh and Sayadi, Sharbanou,1396,Aperture Back Calibration through DFN for Stochastic Discontinuum Modeling of Groundwater Inflow into Underground Excavations,12th Iranian & 3rd Regional Tunnelling Conference,Tehran

ارائه‌شده در

پوستر مجموعه مقالات سومین کنفرانس منطقه ای و دوازدهمین کنفرانس تونل ایران مجموعه مقالات سومین کنفرانس منطقه ای و دوازدهمین کنفرانس تونل ایران6 آذر 1396 · تهران
ادامه مسیر پژوهش

مقالات مرتبط

مقاله کنفرانسی سال ۱۳۹۶ ۲,۱۷۶ مشاهده

بررسی روشهای خروج دستگاه حفاری مکانیزه((TBM در پایان عملیات حفاری مطالعه موردی پروژه تونل انتقال آب غدیر

تونل انتقال آب از سد دز با قطر حفاری 5/275 متر و طول تقریبی 9200 متر از منطقه جارمه در حومه شهر اندیمشک…

اورهالپرتالشفت
مقاله کنفرانسی سال ۱۳۹۶ ۱,۸۳۱ مشاهده

بررسی پارامترهای عملکردی دستگاه حفاری تمام مکانیزه (TBM) (مطالعه موردی : مترو خط 2 تبریز)

برای تحلیل مناسب عملکرد TBM، سعی شده است تا عملکرد دستگاه TBM و فعالیتهای صورت گرفته به صورت موردی با نگ…

TBMدیتالاگرفوم
مقاله کنفرانسی سال ۱۳۹۶ ۱,۶۶۷ مشاهده

مقایسه روشهای مختلف اجرای تونل های ترافیکی در شهر تهران

براساس شاخصهای توسعه در مقیاس کلان، گسترش فضاهای زیرزمینی و تونل سازی به جهت محدودکردن ترافیک شهری، آلود…

تونلهای شهریژئوتکنیک محل حفاریحفاری با TBM
مقاله کنفرانسی سال ۱۳۹۶ ۱,۴۷۵ مشاهده

بررسی قرارداد طرح و ساخت EPC در پروژه های ساخت تونل و مترو مطالعه موردی خط 2 قطارشهری مشهد و خط 7 مترو تهران

در سالهای اخیر نیز شاهد تمایل روزافزون کارفرمایان این بخش به واگذاری پروژه های ساخت تونل و مترو به صورت…

EPCپروژه های ساخت تونل و متروقرارداد طرح و ساخت
مقاله کنفرانسی سال ۱۳۹۶ ۱,۴۷۱ مشاهده

مدل سازی سه بعدی آزمایش سایش سرشار با نرم افزار PFC 3D

سایش ابزارآلات و قطعات ماشینهای حفاری یکی از مهمترین مسائل حفاری مکانیزه با ماشینهای TBM است که باعث افز…

حفاری مکانیزهسایندگیمدلسازی عددی
مقاله کنفرانسی سال ۱۳۹۶ ۱,۳۴۶ مشاهده

طراحی الگوی انفجار چال های محیطی تونل ها با هدف کمینه کردن آسیب وارد بر توده سنگ

چال های محیطی چالهایی هستند که شکل نهایی مقطع تونل را به وجود می آورند فاصله چال های محیطی از یکدیگر و ب…

چال های محیطیانفجار کنترل شدهالگوهای انفجاری