مقاله کنفرانسی سال ۱۳۹۶ انگلیسی

EPB-TBM Tunneling in Abrasive Soil Tehran Metro Tunnel Line 7, Iran

EPB-TBM Tunneling in Abrasive Soil Tehran Metro Tunnel Line 7, Iran

چکیده مقاله

Abrasive soils can cause wear to the cutting tools and machine components and this has been observed in Line 7 of Tehran Metro project, Iran This project includes 6498 m of tunnel The ground along the tunnel route is formed by alluvial deposits, composed mainly of gravely sand with clay/silt and sandy gravel with clay Among the fluvial deposits there are some layers and/or lenses of sandy GRAVEL or gravely SAND and/or clayey silty SAND with GRAVEL deposits containing different coarse fractions Another noticeable phenomenon in these deposits is the considerable content of cobbles and boulders in the tunnel route In order to determine the abrasiveness of cobbles and boulders, the Cerchar tests were carried out on samples collected from the tunnel route The results shows that cobbles and boulders samples were classified as extremely abrasive rock Furthermore, abrasiveness and wear potential of soils along the tunnel alignment were assessed based on newest approach The wear potential of the soilshows the 88% of all samples at tunnel route were have wear potential between high to extremely high high=36%, very high=51% and extremely high=1% In this project, the number of cutting tools replaced were 1169, including 654 rippers, 357 scrapers and 153 disc cutters As well as secondary wear on cutterhead has been observed This paper will briefly discuss the observed impacts of abrasive ground and the lessons that can be learnt from this project Primary and secondary wear were observed on cutterhead of machine in this length of tunnel, including wear on cutting tool, cutterhead body The major potential factors on wear including abrasive ground condition, and operational parameters were assessed and it was found that the main cause of the observed wear are geology coarse grains, cobbles and boulders in this phenomenon and soil conditioning parameters This study briefly reviews the effects of this parameter in damages on cutterhead bodies

کلیدواژه‌ها

Abrasive soil Soft ground EPBM Mineralogy Cerchar test Tehran Metro Line 7

نویسندگان

شیوه ارجاع

Amoun, Sadegh and Sharifzadeh, Mostafa and Tarigh Azali, Sadegh and Tabesh, Mahmood,1396,EPB-TBM Tunneling in Abrasive Soil Tehran Metro Tunnel Line 7, Iran,12th Iranian & 3rd Regional Tunnelling Conference,Tehran

ارائه‌شده در

پوستر مجموعه مقالات سومین کنفرانس منطقه ای و دوازدهمین کنفرانس تونل ایران مجموعه مقالات سومین کنفرانس منطقه ای و دوازدهمین کنفرانس تونل ایران6 آذر 1396 · تهران
ادامه مسیر پژوهش

مقالات مرتبط

مقاله کنفرانسی سال ۱۳۹۶ ۲,۱۷۶ مشاهده

بررسی روشهای خروج دستگاه حفاری مکانیزه((TBM در پایان عملیات حفاری مطالعه موردی پروژه تونل انتقال آب غدیر

تونل انتقال آب از سد دز با قطر حفاری 5/275 متر و طول تقریبی 9200 متر از منطقه جارمه در حومه شهر اندیمشک…

اورهالپرتالشفت
مقاله کنفرانسی سال ۱۳۹۶ ۱,۸۳۱ مشاهده

بررسی پارامترهای عملکردی دستگاه حفاری تمام مکانیزه (TBM) (مطالعه موردی : مترو خط 2 تبریز)

برای تحلیل مناسب عملکرد TBM، سعی شده است تا عملکرد دستگاه TBM و فعالیتهای صورت گرفته به صورت موردی با نگ…

TBMدیتالاگرفوم
مقاله کنفرانسی سال ۱۳۹۶ ۱,۶۶۷ مشاهده

مقایسه روشهای مختلف اجرای تونل های ترافیکی در شهر تهران

براساس شاخصهای توسعه در مقیاس کلان، گسترش فضاهای زیرزمینی و تونل سازی به جهت محدودکردن ترافیک شهری، آلود…

تونلهای شهریژئوتکنیک محل حفاریحفاری با TBM
مقاله کنفرانسی سال ۱۳۹۶ ۱,۴۷۵ مشاهده

بررسی قرارداد طرح و ساخت EPC در پروژه های ساخت تونل و مترو مطالعه موردی خط 2 قطارشهری مشهد و خط 7 مترو تهران

در سالهای اخیر نیز شاهد تمایل روزافزون کارفرمایان این بخش به واگذاری پروژه های ساخت تونل و مترو به صورت…

EPCپروژه های ساخت تونل و متروقرارداد طرح و ساخت
مقاله کنفرانسی سال ۱۳۹۶ ۱,۴۷۱ مشاهده

مدل سازی سه بعدی آزمایش سایش سرشار با نرم افزار PFC 3D

سایش ابزارآلات و قطعات ماشینهای حفاری یکی از مهمترین مسائل حفاری مکانیزه با ماشینهای TBM است که باعث افز…

حفاری مکانیزهسایندگیمدلسازی عددی
مقاله کنفرانسی سال ۱۳۹۶ ۱,۳۴۶ مشاهده

طراحی الگوی انفجار چال های محیطی تونل ها با هدف کمینه کردن آسیب وارد بر توده سنگ

چال های محیطی چالهایی هستند که شکل نهایی مقطع تونل را به وجود می آورند فاصله چال های محیطی از یکدیگر و ب…

چال های محیطیانفجار کنترل شدهالگوهای انفجاری