مقاله کنفرانسی سال ۱۳۹۸ انگلیسی

Modeling and Analyzing industrial Loads: A 7-Bus Multi-Machine Case Study

Modeling and Analyzing industrial Loads: A 7-Bus Multi-Machine Case Study

چکیده مقاله

The increasing growth of energy consumption in various parts of the power industry, especially in the industrial sector, needs to be further explored and further studies are needed to optimize fuel and energy consumption in this field The purpose of modeling power systems that is non linear is to examine its behavior in different modes Typically, power systems are grouped into different levels of generation, transmission, distribution and consumption based on different voltages, which are generally divided into household, agricultural, commercial and industrial loads based on consumption The main objective of the project is to study the behavior of industrial loads in various conditions andexperiments A factory with a combination of induction motors and constant load capacities is considered In the industrialized world, a large amount of energy is consumed by a large number of electric motors that are powered less directly from the main source and in a steady state In many practical designs, an electric machine is usually composed of a large number of electric machines that are interconnected at the control level Electric machines on such systems regularly turn off and turn on and change their mode from the motor to generator Also, in most cases, they are controlled by power electronic networks Therefore, the understanding of the behavior and function of electric vehiclesand drives in a dynamic environment requires a special study An Industrial factory has been simulated in matlab including dynamic and ZIP loads for studying electric machines behaviors during different fault and disturbances

کلیدواژه‌ها

نویسندگان

تصویر Mohsen Arzani

Mohsen Arzani

Department Of Electrical and Computer Engineering, Tarbiat Modares University, Tehran, Iran

شیوه ارجاع

Arzani, Mohsen,1398,Modeling and Analyzing industrial Loads: A 7-Bus Multi-Machine Case Study,Sixth National Congress on Electrical Engineering and Computer Engineering of Iran with a New Approach to New Energy,Tehran

ارائه‌شده در

پوستر مجموعه مقالات ششمین کنگره ملی تازه های مهندسی برق و کامپیوتر ایران با نگاه کاربردی بر انرژی های نو مجموعه مقالات ششمین کنگره ملی تازه های مهندسی برق و کامپیوتر ایران با نگاه کاربردی بر انرژی های نو12 اردیبهشت 1398 · تهران
ادامه مسیر پژوهش

مقالات مرتبط

مقاله کنفرانسی سال ۱۳۹۸ ۱۳,۰۸۷ مشاهده

طراحی و شبیه سازی ژنراتور مغناطیس دائم شار محوری - شعاعی با روتور مخروطی شکل با توان 1/1 کیلووات به منظور کاربرد در توربین های بادی کوچک

در این طرح، به طراحی، محاسبات طراحی و شبیه سازی یک ژنراتور مغناطیس دائم که شامل دو بخش شار شعاعی و محوری…

روتورمخروطی شکلروش اجزای محدودتوربین بادی اتصال مستقیم
مقاله کنفرانسی سال ۱۳۹۶ ۶,۵۷۱ مشاهده

کاربرد هوش مصنوعی در بازی رایانه ای

حتما در دوران کودکی بازی O X را انجام دادید به طور مثال شما با حرف O و دوستتون با حرف X خونه های یه جدول…

مقاله کنفرانسی سال ۱۳۹۶ ۵,۵۸۷ مشاهده

بررسی اخلال راداری و روش های نوین جمینگ سیگنال

امروزه اغلب تسلیحات نظامی از وسایل الکترونیکی استفاده میکند استفاده از رادار برای آشکار سازی و مکانیابی…

جمینگاخلال راداریجنگ الکترونیک
مقاله کنفرانسی سال ۱۳۹۸ ۴,۳۰۲ مشاهده

الگوریتم رمزنگاری AES

رمزنگاری دانشی است که به بررسی و شناخت اصول و روش های انتقال یا ذخیره اطلاعات به صورت امن، حتی اگر مسیر…

رمزنگاریرمزگشاییکلی های رمزنگاری
مقاله کنفرانسی سال ۱۳۹۸ ۳,۵۶۹ مشاهده

مروری بر پردازش تصویر فازی و کاربرد های آن

پردازش تصویر یکی از علومی است که در زندگی امروزه کاربرد فراوانی دارد پردازش تصویر می تواند هر عملیاتی ما…

منطق فازیپردازش تصویرکاهش نویز
مقاله کنفرانسی سال ۱۳۹۶ ۳,۵۳۲ مشاهده

مروری بر اینترنت اشیاء (IOT)

امروزه با پیشرفت علم جهان ماهیت جدیدی پیدا می کند، در این ماهیت جدید نهتنها انسانها بلکه اجسام نیز می تو…

اینترنت اشیاءمعماری اینترنت اشیاءرایانش ابری