چکیده مقاله
In this study, the effect of diffusion bonding temperature on microstructure properties of Zr/Ti interlayer in the diffusion bonded joints of Zr702 to A516 low alloy steel was performed diffusion bonding was performed by SPDB method using spark plasma sintering technique SPS at temperatures of 1000, 950 ℃ and 900 in 30 minutes To study the microstructure of the interfaces in different joints, a field emission electron microscope FESEM equipped with an EDS analyzer was used The results showed that diffusion was well done in the interface of all interlayers at all three temperatures and no intermetallic phases, cracks and discontinuities were observed in the diffusion zone three solid solution phases were observed in all of diffusion zones: α β Zr,Ti , α Ti,Zr andβ Ti,Zr Also, the thickness of the diffusion zones was measured, with the highest diffusion in sample number one with a thickness of 82 979 microns and the lowest diffusion in sample number three with a thickness of 64 235 microns
کلیدواژهها
نویسندگان
شیوه ارجاع
Pourjafar, Ali and Dehmolaei, Reza and Alavi Zare, Seyed Reza,1400,Effect of diffusion bonding temperature on microstructure properties of Zr/Ti interlayer in the diffusion bonded joints of Zr702 to A516 steel,4th International Conference on Welding and Non Destructive Testing & 22nd National Conference on Welding & Inspection & 11th National Conference on NDT,Isfahan
ارائهشده در
مجموعه مقالات چهارمین کنفرانس بین المللی جوشکاری و آزمایش های غیرمخرب و بیست و دومین کنفرانس ملی جوش و بازرسی و یازدهمین کنفرانس ملی آزمایش های غیرمخرب18 اسفند 1400 · اصفهان