Titanium

Cutting Force Modelling in End-Milling Operation of Titanium Thin-Walled Parts

Titanium alloys are widely used for aerospace thin walled parts such as compressor or turbine blades, Frames, etc However in production, titanium all…

Effects of Time and Temperature on the Shear Strength of Dissimilar Diffusion Joints of CPTi to Stainless Steel.

Transition joints between commercial pure titanium CP Ti and 304 stainless steel 304 SS have been produced employing diffusion welding technique in t…

Dissimilar bonding of Ti6Al4V titanium alloy to Al6061 aluminum alloy by transient liquid phase method

Titanium and aluminum alloys have been widely used in various industries, including automotive, aerospace and sports industries, due to their attract…

Introduction to a pre-pilot electrocoagulation system using Titanium anode for the textile industry wastewater treatment

In the present study, the ability of a pre pilot wastewater treatment system based on electrocoagulation was evaluated for the treatment of textile i…

The effect of friction stir processing on the microstructure andcorrosion resistance of commercially pure titanium

The optical microscope has been used for microstructure investigation, electrochemicalimpedance spectroscopy test for corrosion investigations, and h…

Effect of diffusion bonding temperature on microstructure properties of Zr/Ti interlayer in the diffusion bonded joints of Zr702 to A516 steel

In this study, the effect of diffusion bonding temperature on microstructure properties of Zr/Ti interlayer in the diffusion bonded joints of Zr702 t…