چکیده مقاله
Block ramps are hydraulic structures which are commonly used in river restorationprojects Especially in the last few decades, the use of this type of structures havebecome more and more popular They furnish a correct balance between thehydraulic functioning and the environmental care, as they minimize the impact onthe environment in which they are located In addition, they can be consideredflexible structures, i e they can easily adapt to the in situ conditions and they canbe easily built to re convert traditional concrete structures They can be built eitherby loose or fixed blocks, arranged on a sloped bed However, a correct design ofthis structural typology has to take into consideration several aspects In particular,the hydraulic functioning of a block ramp is assured when the structure remainsstable, i e when the blocks are not removed from their original position Thus, thefirst step in designing block ramps has to be the structural stability Furthermore,the analysis has to focus also on the dissipative process occurring on them, inparticular it has to consider the different flow regimes that can take place and theeffect of the bed roughness on the energy dissipation Another important aspect isthe stilling basin design In fact, a block ramp has not to be considered as anisolated element in the contest in which it is located It is part of that contest and itcontributes to modify it Thus, it is extremely important to consider the scourprocess occurring downstream of the structure In particular, the maximum scourdepth and length have to be carefully estimated in order to avoid structural collapseof the ramp The scour process occurring downstream of the structure is alsoextremely important in terms of energy dissipation In fact, the global dissipativeprocess is the result of two distinct processes: one occurring on the ramp and theother in the downstream stilling basin Finally, the analysis has to take intoconsideration which are the global sediment transport conditions of the river inwhich the structure is located Thus, it has to be conducted in both clear water andlive bed conditions It appears evident that a correct design of this type ofstructures is a complex operation which requires a particular attention in order toavoid functioning problems
کلیدواژهها
نویسندگان
Stefano Pagliara
DESTEC –Department of Energy Engineering, Systems,Land and Construction – University of Pisa – Pisa – Italy
Michele Palermo
Stefano Pagliara DESTEC –Department of Energy Engineering, Systems,Land and Construction – University of Pisa – Pisa – Italy
شیوه ارجاع
Pagliara, Stefano and Palermo, Michele,1391,State of art in block ramp and downstream stilling basin design,09th International River Engineering Conference,Ahvaz
ارائهشده در
مجموعه مقالات نهمین سمینار بین المللی مهندسی رودخانه3 بهمن 1391 · اهواز