چکیده مقاله
Metal forming processes are among the most important processes in the industry that have been common since ancient times One of the most important types is forging In the case of metals such as steel, hot forging is the most suitable forging operation In this study, hot forging was performed on a cylindrical piece of steel, which we used to simulate from Abaqus software version 6 14 We used two different methods for elementing in the software and by comparing the solution time and the results, we came to the conclusion that the time is longer, but due to the large deformation, the use of the Adaptive Mesh method is more accurate Also, by examining the mold temperature, we found that it does not have much effect on stress and other parameters And by examining the friction and increasing its coefficient, we gradually observed an increase in temperature in the part and its effect on stress was also seen
کلیدواژهها
نویسندگان
Pouria Pakzad
Department of Renewable Energies and Environment, Faculty of New Sciences and Technologies, University of Tehran, Tehran, Iran
Ali Jafari Karafestani
Undergraduate Student, Department of mechanical engineering, University of Tafresh, Markazi, Iran
Saeed Almasifard
Department of Renewable Energies, Faculty of Mechanical and Energy Engineering, Shahid Beheshti University, Tehran, Iran
شیوه ارجاع
Jafari Karafestani, Ali,1399,Simulation and investigation of the influence of some parameters in the hot forging process of steel cylinders,Sixth International Conference on Mechanics, Manufacturing, Industries and Civil Engineering
ارائهشده در
مجموعه مقالات ششمین کنفرانس بین المللی مکانیک، ساخت، صنایع و مهندسی عمران27 اسفند 1399