چکیده مقاله
Seismic performance of existing Reinforced Concrete RC frames which had been designed based on old building codes were unacceptable; the main reason is that such structures have low resistance to lateralloads which result in large deformations during earthquakes The seismic retrofit procedure for bending frames must consider the strengthening of columns, beams and beam column joints in order to prevent brittle failure modes The Fiber Reinforced Polymer FRP strengthening procedure would cause minimalincrease in size and weight of structural members, ease of installation and efficient corrosion resistance In this paper, seismic behavior of RC frames externally bonded with FRP sheets under three significant earthquakes have been investigated The formation of the plastic hinges generated in the members and the inter story drift ratio of the floor levels were studied Analytical results indicated that in RC frames withno FRP strengthening, large hinge rotations lead to a brittle column mechanism but conversely, the frames strengthened with FRP jackets showed an improved plastic hinge distribution with more hinges in beams and fewer in columns Also by comparing moment curvature curves and moment axial load interaction curves of columns before and after FRP jacketing, it was observed that FRP strengthening would lead to considerable increase in the strength and ductility of columns Finally as a parametric study, the thicknesses of FRP layers used for the strengthening of the columns, beams and joints were taken into account and various models with different amount of FRP materials were compared and the optimized thickness was obtained
کلیدواژهها
نویسندگان
شیوه ارجاع
Naderpour, Hosein and Hoseini Vaez, Seyed Rohollah,1391,Seismic Evaluation of Reinforced Concrete Frames Retrofitted by FRP Sheets,9th International Congress on Civil Engineering,Isfahan
ارائهشده در
مجموعه مقالات نهمین کنگره بین الملی مهندسی عمران19 اردیبهشت 1391 · اصفهان