چکیده مقاله
In hybrids, the different damping ratios of two parts of these structures make earthquake design of such structures troublesome procedure Many design engineers end up using an overall conservative damping ratio equal to 2% in order to be on the safe side In this paper, the MDOF structure is transformed to a 2 DOF oscillator; in the first step, an equivalent modal damping ratio is proposed The new 2 DOF equivalent structure with equivalent modal damping ratios has been real appreciated eigen values Next step is introducing an equivalent uniform damping ratio that is obtained by semi empirical error minimization and can be used in available commercial software The results in models indicate that the use of these damping ratios with acceptable accuracy in most cases errors are below 5% and also the response of approximate structure obtained by these damping ratios is much closer to actual one when compared to the usual approach that adopts the overall conservative damping equal to 2%
کلیدواژهها
نویسندگان
Mohsen Gerami
Assistant Professor, Faculty of Civil Eng, Semnan University, Semnan, Iran
Daryush Khodayarnezhad
M Sc candidate of Earthquake Engineering, Faculty of Civil Eng, Semnan University, Semnan
Abbas Sivandi Pour
PhD candidate of Earthquake Engineering, Faculty of Civil Eng, Semnan University, Semnan,
شیوه ارجاع
Gerami, Mohsen and Khodayarnezhad, Daryush and Sivandi Pour, Abbas,1391,Evaluation of equivalent modal and uniform damping ratios in hybrid structures,9th International Congress on Civil Engineering,Isfahan
ارائهشده در
مجموعه مقالات نهمین کنگره بین الملی مهندسی عمران19 اردیبهشت 1391 · اصفهان