چکیده مقاله
One method of biological wastewater treatment is activated sludge The activated sludge process is the most commonly used technology for biological wastewater treatment Bulking sludge is a complicated and unpredictable challenge for many wastewater treatment plants globally The sludge will not settle properly and huge amounts of soft foam can float all over the plant One of the methods to prevent bulking sludge is use of selector before main aeration basin In this paper the effect of use of anoxic selector in activated sludge process was investigated Experiments were conducted in batch culture with use of Sequential Batch Reactor SBR system Three reactors, each with 4 liter volume, and different initial floc loading were used Different anoxic feeding time which shows contact time in the selector were applied in terms of 0,20,30,40 min Parameter sludge volume index SVI was measured for different initial floc loading and contact time in the selector Results from this study showed that selector with contact time of 40 min and floc loading 0 4 has good effect on sludge stability
کلیدواژهها
نویسندگان
Helia Sharafi
Department of Civil Engineering, Shiraz University, Shiraz, Iran
Mahsa Hadipour
Helia Sharafi Department of Civil Engineering, Shiraz University, Shiraz, IranGholamreza Rakhshanderoo
Gholamreza Rakhshanderoo
Helia Sharafi Department of Civil Engineering, Shiraz University, Shiraz, IranMahsa Hadipour
شیوه ارجاع
Sharafi, Helia and Hadipour, Mahsa and Rakhshanderoo, Gholamreza,1391,INVESTIGATION OF THE EFFECT OF ANOXIC SELECTOR ON SLUDGE BULKING IN SBR SYSTEM(case study: SHIRAZ WasteWater Treatment Plant IN South-Western of IRAN,9th International Congress on Civil Engineering,Isfahan
ارائهشده در
مجموعه مقالات نهمین کنگره بین الملی مهندسی عمران19 اردیبهشت 1391 · اصفهان