چکیده مقاله
Hardware implementation of the Plug in hybrid electric vehicles PHEVs control strategy is an important stage of the development of the vehicle electric control unit ECU This paper introduces Model Based Design MBD approach for implementation of PHEV energy management Based on this approach, implementation of the control algorithm on an electronic hardware is performed using automatic code generation The advantages of the MBD in comparison with the traditional methods are the capability of eliminating the manual coding complexities as well as compiling problems and reducing the test duration In this study, hardware implementation of a PHEV rule based control strategy is accomplished using MBD method In addition, in order to increase the accuracy of the results of the implementation, data packing method is used In this method, by controlling the primer and end data of the data packet transferred between the electronic board and the computer system, the noisy data is prevented from entering Moreover, to verify the performance of the implemented control strategy, hardware in the loop HIL simulation is used with the two frequency rates The results show the effectiveness of the proposed approach in correct and rapid implantation procedure
کلیدواژهها
نویسندگان
شیوه ارجاع
Montazeri-Gh, Morteza and Khasheinejad, Masoud and Pourbafarani, Zeinab,1397,Model-Based Design approach for Implementation of PHEV Energy Management,1st International Conference on Modern Power Trains,Tehran
ارائهشده در
مجموعه مقالات اولین همایش بین المللی قوای محرکه نوین (با محوریت خودروهای برقی)8 اسفند 1397 · تهران