مقاله کنفرانسی سال ۱۳۹۷ انگلیسی

Performance evaluation of PEM fuel cells; impact of relative humidity, pressure and temperature of inlet species on the current density of the PEMFCs

Performance evaluation of PEM fuel cells; impact of relative humidity, pressure and temperature of inlet species on the current density of the PEMFCs

چکیده مقاله

Due to the increasing level of air pollution and the reduction of fossil fuels, the need for new technologies and alternative fuels is felt more than ever Proton exchange membrane fuel cells PEMFCs are one of these technologies, which have been of great interest to the researchers due to the benefits of non contamination, high efficiency, fast start up, and high power density The proper functioning of the fuel cell requires thermal management and water management within the cells To this end, in this work, the effect of different parameters on the performance of PEM fuel cell was investigated The results demonstrated that the performance of the cell increases with increasing the pressure in the low current densities, while in the high current density, performance decreases with increasing the pressure of the cell Also, the study of the effect of relative humidity shows that increasing the relative humidity of the cathode does not have much effect on the performance of the cell while increasing the relative humidity of the anode improves the performance of the cell

کلیدواژه‌ها

thermal management water management PEMFC proton exchange membrane fuel cell

نویسندگان

تصویر Hamed Davardoust

Hamed Davardoust

Research Laboratory of Automotive Fluids and Structures Analysis, Automotive Engineering School, Iran University of science and technology, Tehran, Iran

تصویر Golamreza Molaeimanesh

Golamreza Molaeimanesh

Automotive Engineering School, Iran University of science and technology, Tehran, Iran Prof G R Molaeimanesh Automotive Engineering School Iran University of Science and Technology Narmak Ave Tehran, ۱۶۸۴۶ ۱۳۱۴۴ Iran

تصویر Sepehr Mousavi

Sepehr Mousavi

Applied Multi Phase Fluid Dynamics lab, School of Mechanical Engineering, Iran University of science and technology, Tehran, Iran

شیوه ارجاع

Davardoust, Hamed and Molaeimanesh, Golamreza and Mousavi, Sepehr,1397,Performance evaluation of PEM fuel cells; impact of relative humidity, pressure and temperature of inlet species on the current density of the PEMFCs,1st International Conference on Modern Power Trains,Tehran

ارائه‌شده در

پوستر مجموعه مقالات اولین همایش بین المللی قوای محرکه نوین (با محوریت خودروهای برقی) مجموعه مقالات اولین همایش بین المللی قوای محرکه نوین (با محوریت خودروهای برقی)8 اسفند 1397 · تهران
ادامه مسیر پژوهش

مقالات مرتبط

مقاله کنفرانسی سال ۱۳۹۷ ۴,۲۰۴ مشاهده

پاشش آب در موتورهای بنزینی، راهکاری نوین برای کاهش مصرف سوخت و آلاینده ها

پاشش آب اخیرا در موتورهای بنزینی مورد توجه قرار گرفته است تبخیر آب دمای مخلوط سوخت و هوا را کاهش میدهد و…

تمایل به کوبشپاشش آبکاهش مصرف سوخت
مقاله کنفرانسی سال ۱۳۹۷ ۳,۱۲۳ مشاهده

شتاب سنج های میکروالکترومکانیکی MEMS در کیسه هوای خودرو

با پیشرفت تکنولوژی، امروزه نیاز به داشتن لوازم اندازه گیری دقیق تر در صنعت، پزشکی، کشاورزی، هوافضا و سای…

سیستم های میکروالکترومکانیکیمیکروشتابسنجکیسه هوا .(Airbag)
مقاله کنفرانسی سال ۱۳۹۷ ۳,۰۷۸ مشاهده

تاثیر استفاده از متانول به عنوان سوخت جایگزین بنزین بر مدت زمان دورهی گرم شدن موتور

یکی از موضوعاتی که در زمینه کاهش آلودگی و بهینه سازی مصرف سوخت در موتورهای احتراق داخلی همواره مورد توجه…

متانولروش ظرفیت فشردهگرمشدن موتور
مقاله کنفرانسی سال ۱۳۹۷ ۲,۷۲۴ مشاهده

بررسی مقایسه ای گیربکس خودرو های هیبرید و برقی با گیربکس های فعلی

در این مقاله ابتدا با انواع گیربکس های اتوماتیک آشنا خواهیم شد سپس انواع خودروهای هیبرید به صورت کلی تقس…

گیربکس خودروهای هیبریدگیربکس خودروهای برقیقوای محرکه در خودروهای نوین
مقاله کنفرانسی سال ۱۳۹۷ ۲,۴۰۴ مشاهده

چالشهای پیشرو در توسعه صنعت خودرو برقی در کشور ایران و جایگاه انواع مدل خودرو برقی در آن

همانگونه که همواره در خصوص مزایای خودروهای الکتریکی عنوان شده است، این خودروها با توجه به راندمان کلی با…

خودروی تمام برقیخودروی هیبریدیخودروی هیبریدی با قابلیت وصل به شبکه
مقاله کنفرانسی سال ۱۳۹۷ ۱,۹۰۳ مشاهده

روش های ساخت مواد هوشمند مغناطیسی و کاربرد در سیستم های تعلیق خودروهای مدرن

در چند دهه اخیر، رشد تکنولوژی در صنایع مختلف از جمله صنعت خودروسازی مورد توجه بسیاری از محققین قرار گرفت…

مواد هوشمندالاستومر مغناطیسیساخت الاستومر