مقاله کنفرانسی سال ۱۴۰۴ انگلیسی

Analysis and Simulation of Stress Distribution in Composite Pipes Using Abaqus Software

Analysis and Simulation of Stress Distribution in Composite Pipes Using Abaqus Software

چکیده مقاله

In this study, a numerical analysis of the mechanical behavior of a six layer composite pipe under internal pressure was conducted using the Finite Element Method FEM in the ABAQUS environment The composite materials used had a symmetric and periodic fiber orientation The main objective of the research was to investigate the stress strain response and deformation pattern of the pipe under axial compressive loading of a pressing type Simulation results showed that the maximum in plane principal stress S, Max In Plane Principal within the structure was 1572 Pascals, appearing in a region with localized stress concentration Additionally, the maximum overall displacement of the structure U, Magnitude was recorded as 6 511 millimeters, indicating significant deformation in an area with minimal boundary constraints The distribution of stresses and strains in the different layers clearly depended on the fiber angle and layer arrangement, indicating anisotropic and direction dependent mechanical behavior of the structure This analysis demonstrates that the design of composite pipes requires precise stress modeling and the use of advanced criteria to predict failure behavior The obtained results can serve as a basis for the optimal design of FRP pipes in industrial applications subjected to internal pressure

کلیدواژه‌ها

نویسندگان

تصویر Behnam Hatami

Behnam Hatami

Instructor, Department of Technical and Engineering, Technical and Vocational University, Eslamabad e Gharb, Iran

تصویر Erfan Nikomanesh

Erfan Nikomanesh

Instructor, Department of Technical and Engineering, Technical and Vocational University, Eslamabad e Gharb, Iran

تصویر Shahram Moradi

Shahram Moradi

Instructor, Department of Technical and Engineering, Technical and Vocational University, Eslamabad e Gharb, Iran

شیوه ارجاع

Hatami, Behnam and Nikomanesh, Erfan and Moradi, Shahram,1404,Analysis and Simulation of Stress Distribution in Composite Pipes Using Abaqus Software,27th National Conference on Electrical, Computer and Mechanical Engineering,Shirvan

ارائه‌شده در

پوستر مجموعه مقالات بیست و هفتمین کنفرانس ملی مهندسی برق ،کامپیوتر و مکانیک مجموعه مقالات بیست و هفتمین کنفرانس ملی مهندسی برق ،کامپیوتر و مکانیک24 شهریور 1404 · شیروان
ادامه مسیر پژوهش

مقالات مرتبط

مقاله کنفرانسی سال ۱۴۰۴ ۱,۹۸۷ مشاهده

بررسی روند اجرای طرح تحول یادگیری وظیفه مدار در آموزش های فنی

در این نوشتار به بررسی روند اجرای طرح تحول یاددهی یادگیری در آموزش های فنی و حرفه ای پرداخته شده است این…

یادگیرییاددهییادگیری وظیفه مدار
مقاله کنفرانسی سال ۱۴۰۴ ۱,۲۰۱ مشاهده

پیش بینی مصرف انرژی در ساختمان های هوشمند با استفاده از شبکه های عصبی اگاه از فیزیک (PINN)

در سال های اخیر، هوشمندسازی زیرساخت ها با هدف کاهش مصرف انرژی و افزایش بهره وری، به یکی از اولویت های اص…

ساختمان هوشمندبهینه سازی انرژیشبکه عصبی آگاه از فیزیک PINN
مقاله کنفرانسی سال ۱۴۰۴ ۸۳۲ مشاهده

بررسی مفاهیم یادگیری وظیفه مدار در طرح تحول نظام آموزشی

در این نوشتار به مفاهیم طرح یادگیری وظیفه مدار پرداخته شده است یادگیری وظیفه مدار در آموزش های فنی و حرف…

یادگیرییاددهیپروژه محوری
مقاله کنفرانسی سال ۱۴۰۴ ۴۸۴ مشاهده

مهندسی مکانیک و نقش آن در صنعت هوافضا

صنعت هوافضا به عنوان یکی از پیشرفته ترین و راهبردی ترین حوزه های فناوری، نیازمند بهره گیری گسترده از اصو…

مهندسی مکانیکمواد مرکبصنعت هوافضا
مقاله کنفرانسی سال ۱۴۰۴ ۴۶۱ مشاهده

بررسی پیامدهای تغییرات اقلیم و افزایش میزان ریزگردها بر پایداری و تاب آوری تجهیزات شبکه برق

شبکه برق، شریان حیاتی توسعه اقتصادی و اجتماعی، به طور فزاینده ای تحت تاثیر تغییر اقلیم و پیامدهای آن نظی…

تغییر اقلیمریزگردهاتجهیزات شبکه برق
مقاله کنفرانسی سال ۱۴۰۴ ۳۹۳ مشاهده

مروری بر سیستم های توصیه گر: روش ها، محدودیت ها و ارزیابی ها

امروزه پیشرفت تکنولوژی در حوزه فناوری، بلاخص فناوری اطلاعات و کامپیوتر و تاثیر این پیشرفت بر علوم، سبب ر…

فیلترینگ مشارکتیفیلترینگ محتواییفیلترینگ ترکیبی