چکیده مقاله
In this paper, the design of a macro strip patch antenna with a photonic crystal structure has been studied The purpose of this study is to create a PGB structure that can be used to design macro strip antennas With this method, you can increase the bandwidth several times and increase the antenna s gain The noise and radiation loss of the antenna will also be significantly reduced by the use of PGB technology The bandwidth is 0 6GHz 1 6THz At 1 4THz frequency, it is 7 703dB This antenna is widely used in high frequency microwave transmitter and microwave receiver systems This research is simulated using the CST Microwave Studio software
کلیدواژهها
نویسندگان
Arash omidi
Department of Engineering, Isfahan University of technology, Isfahan, Iran
hamed moradi
APM Group International Inc, Kermanshah, Iran
Parisa Sadat Emadi
Department of Engineering, Isfahan University of technology, Isfahan, Iran
Eiman Pouradad
Department of Electronics Engineering Collage No ۲, Kermanshah, Iran
شیوه ارجاع
omidi, Arash and moradi, hamed and Emadi, Parisa Sadat and Pouradad, Eiman,1396,Antenna Design Using PBG Technology for Micro Electronic Applications,Fifth International Conference on Electrical and Computer Engineering with Emphasis on Indigenous Knowledge,Tehran
ارائهشده در
مجموعه مقالات پنجمین کنفرانس بین المللی مهندسی برق و کامپیوتر با تاکید بر دانش بومی19 بهمن 1396 · تهران