مقاله کنفرانسی سال ۱۴۰۴ انگلیسی

Multi-scale analysis of Lamb wave propagation in a steel beam excited and sensed by piezoelectric transducers

Multi-scale analysis of Lamb wave propagation in a steel beam excited and sensed by piezoelectric transducers

چکیده مقاله

The Multi Scale Technique MTS has been successful in this respect and has been able to explain the lamb waves generated in the steel beam The result achieved through the analysis of the STFT algorithm confirmed that the variation of the dynamics involved is dependent on the variation of the sensors' distance to each other, irrespective of the values of the spectral frequencies The experiment revealed that there is a direct proportion between time of flight and the sensors' distance furthermore, it is proven that the group velocity is independent of the position of the sensors, and hence the hypothesis that the Dispersion Effect value will be ignored is verified This is the reason why the proposed method that has been identified and discussed in this article is bound to prove its validity and usability to the ultrasonic structural health monitoring technique because of its capability to produce genuine models based on the wave propagation and attenuation Analyzing the result of STFT output, it is understood that as the propagation interval increases, the direct relationship between the spreading levels of the lamb wave packets in the time frequency domain is observed It is understood that when the value of the correction terms expressed in terms of ε² and ε³ are smaller, the value of dispersion is smaller

کلیدواژه‌ها

Amplitude evolution Time-frequency analysis short-time fourier transform Method of multi scales Ultrasonic structural health monitoring Time frequency analysis short time fourier transform

نویسندگان

تصویر Fateme Imani

Fateme Imani

Department of Mechanical Engineering, Amirkabir University of Technology, Tehran, Iran

تصویر Mahnaz Shamshirsaz

Mahnaz Shamshirsaz

New Technologies Research Center, Amirkabir University of Technology, Tehran, Iran

شیوه ارجاع

Imani, Fateme and Shamshirsaz, Mahnaz and Mohammadi Aghdam, Mohammad,1404,Multi-scale analysis of Lamb wave propagation in a steel beam excited and sensed by piezoelectric transducers,1st International & 7th National conference on Mechanical-civil engineering and advanced technologies,Esfarayen

ارائه‌شده در

پوستر مجموعه مقالات اولین کنفرانس بین المللی و هفتمین کنفرانس ملی مهندسی مکانیک، عمران و فناوری های پیشرفته مجموعه مقالات اولین کنفرانس بین المللی و هفتمین کنفرانس ملی مهندسی مکانیک، عمران و فناوری های پیشرفته19 آبان 1404 · اسفراین
ادامه مسیر پژوهش

مقالات مرتبط

مقاله کنفرانسی سال ۱۴۰۴ ۳۷۶ مشاهده

تحلیل بهینه سازی اجرای خاکریزی در بسترهای ناپایدار با رویکرد مهندسی ژئوتکنیک در مسیر پروژه احداث راه آهن چابهار-زاهدان

مسیر راه آهن چابهار زاهدان با گذر از بسترهای ناپایدار شامل رس های نرم نهشته های شور سولفاتی و تراز بالای…

خاکریزالگوریتم های هوشمندسیستم زهکشی پیشگیرانه
مقاله کنفرانسی سال ۱۴۰۴ ۲۱۱ مشاهده

بررسی اثر فرآیند تفجوشی و اکستروژن بر رفتار خوردگی کامپوزیت پودری مس/گرافن

امروزه برای رسیدن به خواص مکانیکی مطلوب از فرآیندهای تغییر شکل پلاستیک شدید استفاده می شود یکی از روش ها…

اکستروژن برشی سادهخوردگیتف جوشی پلاسمای جرقه ای
مقاله کنفرانسی سال ۱۴۰۴ ۲۰۸ مشاهده

Experimental investigation of black powder deposition effects on the accuracy of natural gas turbine flow meters

The presence of black powder particles in pipelines, particularly under critical conditions of high gas…

black powderdepositionnatural gas
مقاله کنفرانسی سال ۱۴۰۴ ۲۰۶ مشاهده

ارائه بهترین راهکار اجرایی طراحی و پیاده سازی ساختمان های انرژی صفر با استفاده از رویکردهای تصمیم گیری چند معیاره

مصرف بالا و روزافزون انرژی در بخش ساختمان موجب افزایش قابل توجه انتشار گازهای گلخانه ای شده است ساختمان…

انرژی های تجدیدپذیرروش MABACروش EXPROM
مقاله کنفرانسی سال ۱۴۰۴ ۱۹۵ مشاهده

طراحی و ساخت بازوی رباتیک با ۶ درجه آزادی

بازوهای رباتیک صنعتی دستگاه های اتوماتیکی هستند که وظایف مختلفی را در خطوط تولید انجام می دهند در این مق…

بازوی رباتیکدرجه آزادیقابلیت کنترل
مقاله کنفرانسی سال ۱۴۰۴ ۱۸۸ مشاهده

ارزیابی و اولویت بندی ریسک های سقوط در پروژه های بلندمرتبه با تلفیق داده های مدل سازی اطلاعات ساختمان (BIM) و اینترنت اشیاء (IoT)

در سال های اخیر شاهد رشد فناوری و پیشرفت های سریع و همه جانبه در صنعت ساخت هستیم پیشرفت هایی که منجر به…

ایمنیسقوطساخت و ساز