چکیده مقاله
The purpose of this article is to investigate a method for reducing carbon monoxide CO emissions in the foundry and metallurgy sector using thermal oxidation For this purpose, a 5 chamber Regenerative Thermal Oxidizer RTO was designed, which resulted in very low production of secondary pollutants Total Organic Compounds TOC ≤20 mg C/Nm3, CO ≤50 mg /Nm3, NOx ≤50 mg perNm3 , which achieved exhaust carbon monoxide concentration values well below the regulatory limits set by European standards The thermal oxidizer operates with a maximum air flow of 110000Nm3/h and a gas burner capacity of 230 kW Its dimensions are 6×3×8 m3 and its chimney height is 8 meters
کلیدواژهها
نویسندگان
Abdollah Bayaziyan
Company Manager
Seyede Mohadese Mousavi
Research and Development Expert
Mohammad Afshar
Abdollah Bayaziyan Company ManagerSeyede Mohadese Mousavi Research and Development ExpertMonir Shalbafan
Monir Shalbafan
Abdollah Bayaziyan Company ManagerSeyede Mohadese Mousavi Research and Development ExpertMohammad Afshar
شیوه ارجاع
Bayaziyan, Abdollah and Mousavi, Seyede Mohadese and Afshar, Mohammad and Shalbafan, Monir,1404,Reducing carbon monoxide (CO) emissions in the foundry and metallurgy sector using thermal oxidation,The 3rd National Conference on Environmental Challenges: The role of industry, mining, and society in developing green governance,Tehran
ارائهشده در
مجموعه مقالات سومین کنفرانس و نمایشگاه ملی چالش های محیط زیستی: نقش صنعت، معدن و جامعه در گسترش حکمرانی سبز19 آبان 1404 · تهران