مقالات حوزه «Heat input»

Effect of welding heat input and travelling speed on residual stresses in butt welds

A finite element FE modelling of the welding process is conducted to calculate welding residual stresses in butt welded plates The model was validate…

Finite element modeling of the effect of heat input on residual stresses in dissimilar joints

In the present sutdy a thermo elastic plastic model was developed in order to evaluationg the residual stresses in dissimailar automatic TIG welds be…

Effect of heat input on the microstructure of AlCoCrFeNi high entropy alloy coating deposited using gas tungsten arc welding

AlCoCrFeNi based high entropy alloy coatings were deposited on low carbon steel substrates using gas tungsten arc welding process in different heat i…

The effect of heat input on the microstructure and wear behavior ofduplex stainless steel weld overlay applied to A283 carbon steel byGTAW method

In this research, the microstructure and wear behavior of duplex stainless steel weldcladdings produced at three heat inputs on A283 carbon steel sub…

Investigation of heat input effect on microstructure and corrosion properties in dissimilar welded joints of A283 GrC steel to 304L stainless steel via SMAW method

In this study, the corrosion behavior of the dissimilar welded joints of 304L austenitic stainless steel and A283 Grade C carbon steel is investigate…

Investigating the effect of heat input on mechanical properties and microstructural in dissimilar joint between A283 Gr C steel and 304L stainless steel in SMAW welding methods

In this research, the effect of heat input on the microstructure and mechanical properties of 304L stainless steel connection to A283 grade C plain c…

Effect heat input of GTAW process on the microstructure and fracture toughness of weld metal in API 5LX90 steel

In this study, the effect of GTAW process input heat on the microstructure of fracture toughness of API 5L X90 micro alloy steel fittings using ER120…

Variation of Microstructural and Mechanical properties of depositedweld metal by using E6013 electrode on St37 steel as a result ofsuccessive repairing

The welding joints due to different reasons such prolonged time, welding defects and etc do not have the necessary efficiency and need to be repaired…

Investigation of fracture toughness of weld metal in X90 API-5L micro alloy steel joints produced by GTAW process

In this study, the fracture toughness of weld metal in API 5L X90 micro alloy steel joints was investigated Welding was performed using filler metals…

Numerical modeling of pulsed Nd:YAG laser welding of s310 austenitic stainless steel using Finite Element Method (FEM)

S310 stainless steel is used in various industries due to its high strength and corrosion resistance In this research, pulsed laser welding simulatio…