مقالات حوزه «Mechanical Properties»

Achieving Optimum Mechanical Properties by Improving Austenizing Temperature and Time for 12Cr2NiWV Steel

12Cr2NiWV steel is a double phase ferritic bainitic alloy which has remarkable resistance to brittleness when exposed to radioactive environment In t…

Scientific hypothesis for explain new bifurcations in bainitic iron alloys and its meaning for material science

During research of bainitic steels with 0,50 % or more content of silicon we disclosed the opposite to 'aging' phenomenon, so called 'Rejuvenation' –…

Finding the best situation of aging on Ecaped Al-Mg-Si-Cu for Improvement of both Strength and Ductility

Equal channel angular pressing ECAP with aging treatment is used on Al Mg Si Cu alloy for obtaining the best mechanical properties The results shows…

Stablishing a Mathematical Model to Predict Mechanical Properties of Friction Stir Welded AA 6061-T4 Aluminium Alloy Joints

Friction stir welding is a mechanical, solid state joining process that is used to joining structural aluminium alloys Compared with the fusion weldi…

The Effect of Copper Powder Size in Fabrication of Al-Mg-Cu Composite Via Friction Stir Processing

Nowadays, fabrication of metal matrix composites with high mechanical properties and modified microstructures has attracted many attentions, so some…

Microstructure and Mechanical Properties of Friction Stir Welded 430 Stainless Steel

This paper investigates the effect of friction stir welding FSW speed on the microstructure and mechanical properties of 430 ferritic stainless steel…

Study of Mechanical Properties and Microstructural Characterization of HSLA-100 GMA Welds and GMA-P Welds

Due to the extensive use of HSLA 100 steel in naval applications, comparing the methods of welding is necessary In this study the mechanical properti…

Effect of Silica Additive on Properties of Porous Alumina Bodies

This present work reports the fabrication of porous ceramic bodies through the sintering of compact powder of alumina and silica as an additive The e…

Microstructural Evolution and Mechanical Properties inHigh Frequency Resistance Welding (HFRW) of 2.25Cr-1Mo Ferrite-Pearlite Steels andferritic Steels 409

In this research, the effect of high frequency resistance welding HFRW parameter on microstructure and mechanical properties on dissimilar joints bet…

Study on the morphology and mechanical properties of PLA/PCL blends

Elastic Modulus and Ultimate Tensile Strength Evaluation of 3D-Printed Tensile Test Specimens of Acrylonitrile butadiene styrene

Additive manufacturing AM alias 3D printing is a promising manufacturing process that directly builds physical parts from computer aided design CAD m…

Artificial neural networks to prediction hardness of HAZ with chemical composition and tensile test of X70 pipeline steels

A neural network with feed forward topology and back propagation algorithm was used to predict the effects of chemical composition and tensile test p…

Experimental Comparisons of Nano Mechanical Properties of Organic and Mineral Calcium Carbonate

A comparative study on the effect of highly expended graphite and graphene nano plates on the mechanical properties of epoxy resin

Evaluation of Microstructure and Mechanical Properties of Resistance Spot Welded with optimize of parameters, in Advanced High Strength Steel, TRIP 980

Resistance spot welds were produced in of advanced high strength Steel, TRIP steel The microstructure and mechanical properties were characterised us…

Investigation of NanoMechanical Properties of Topneck mollusks shell in Direction of the Prismatic Layer and Perpendicular to the Prismatic Layer

Toward oxidation of bacterial nano-cellulose

The Comparison of Mechanical Properties of Topneck Mollusks Shell Nano Composite in Different Conditions

Effect of Layer Thickness and Infill Percentage on The Mechanical Characterization of Fused Deposition Modeling ABS specimens

Fused deposition modeling FDM is a 3D printing process that produces parts by heating, extruding and depositing the thermoplastic polymers FDM fabric…

Microstructure and mechanical properties of TLP bonded a low C–Mn steel using copper interlayer with different thickness

Transient liquid phase bonding was used to join a low carbon manganese steel st52 at 1423K 1150C with copper interlayers of 10, 30 and 50μm thickness…

Study of Mechanical / Structural Relationship in Polysulfone/ Polysulfone-g-Polyacrylate Blend Membranes

Evaluation of properties Carbon Nanotubes (CNTs) and CNT/polymer composites

Impacts of elevated-temperature constrained groove pressing on the mechanical properties and microstructure of light-weight alloy sheets

One of sheet severe plastic deformation SPD operation, namely constrained groove pressing CGP , is studied here in order to investigate the influence…

Experimental and numerical study on severe plastic deformation of pure copper using simple shear extrusion process