Residual stress

Some Numerical and Experimental Studies on the Indentation Forging of Thick- Walled Tubes

Indentation forging process is used for internal forming and sizing of thick walled tubes designed to withstand high internal pressures In this proce…

Finite Element Assessment of Residual Stress and Distortion for T-Joint-fillet and butt-weld joints using the Element Birth Technique

This paper reports the finite element modeling of the electric arc welding process for the assessment of the resultant residual stresses for two spec…

Experimental and Numerical Investigations of the Influences of Weld Length and Groove Configurations on Residual Stress Distributions

Residual stresses were produced in the weldments due to mismatching and un even distributions of non elastic strains In this paper, the effects of we…

Incremental Slitting Determination of Residual Stress in Rolled Aluminium Plate Using Strip Loads and Series Expansion Approaches

In this research, the slitting method was employed to determine through thickness residual stress profile of a rolled aluminium plate The method invo…

Investigation of Effects of Tool Rake Angle and Cutting Speed on Residual Stress Distribution in Unlubricated Orthogonal Machining 2024 - T351 Aluminum Alloy with High-Speed Steel Tools

Ring shape specimens of 2024 T351 aluminum alloy were machined under unlubricared orthogonal conditions with high speed steel tools having rake angle…

Laser ultrasonic technology for residual stress measurement of 7075 aluminum alloy friction stir welding

EBSD Study and simulation of residual stresses in dissimilar transient liquid phase joining of SAF 2205 duplex stainless steel to

In this study, dissimilar transient liquid phase bonding of SAF 2205 and IN X 750 alloys was investigated The joining process was carried out at 1100…

Numerical analysis of temperature distributions in friction stir welding of steel plates

Residual stresses or locked in stresses are one of the most significant mechanisms that are generated in almost all the welding processes During the…