مقالات حوزه «Residual stress»

Some Numerical and Experimental Studies on the Indentation Forging of Thick- Walled Tubes

Indentation forging process is used for internal forming and sizing of thick walled tubes designed to withstand high internal pressures In this proce…

Finite Element Assessment of Residual Stress and Distortion for T-Joint-fillet and butt-weld joints using the Element Birth Technique

This paper reports the finite element modeling of the electric arc welding process for the assessment of the resultant residual stresses for two spec…

Experimental and Numerical Investigations of the Influences of Weld Length and Groove Configurations on Residual Stress Distributions

Residual stresses were produced in the weldments due to mismatching and un even distributions of non elastic strains In this paper, the effects of we…

Incremental Slitting Determination of Residual Stress in Rolled Aluminium Plate Using Strip Loads and Series Expansion Approaches

In this research, the slitting method was employed to determine through thickness residual stress profile of a rolled aluminium plate The method invo…

Investigation of Effects of Tool Rake Angle and Cutting Speed on Residual Stress Distribution in Unlubricated Orthogonal Machining 2024 - T351 Aluminum Alloy with High-Speed Steel Tools

Ring shape specimens of 2024 T351 aluminum alloy were machined under unlubricared orthogonal conditions with high speed steel tools having rake angle…

Laser ultrasonic technology for residual stress measurement of 7075 aluminum alloy friction stir welding

EBSD Study and simulation of residual stresses in dissimilar transient liquid phase joining of SAF 2205 duplex stainless steel to

In this study, dissimilar transient liquid phase bonding of SAF 2205 and IN X 750 alloys was investigated The joining process was carried out at 1100…

Numerical analysis of temperature distributions in friction stir welding of steel plates

Residual stresses or locked in stresses are one of the most significant mechanisms that are generated in almost all the welding processes During the…

Analysis and study of distortion and residual stresses in the layer produced from Ti6Al4V alloy by selective laser melting method

Selective Laser Melting SLM is an Additive Manufacturing AM technique used to process Ti6Al4V in medicine, aerospace and other industries In this res…

Numerical Evaluation of Hydrogen-induced Cracking Susceptibility in X70 Steel Welds Using Finite-element Method

This research was carried out to numerically calculate the amount of hydrogen in pre heated and post heated X70 steel weldments with a specific geome…

Residual Stress and deformation analysis and prediction of SLM manufacturedsamples with the Inherent Strain method

The residual stress developed during manufacturingprocesses has an important role on the success of the samplesmanufacturing The laser powder bed fus…

Simulation of Additive Manufacturing of Nickel-Based Superalloy 718 Using Laser Powder Bed Fusion

In recent years, the use of new manufacturing methods such as additive manufacturing has attracted attention from industries including automotive, ae…

The effect of pulsed laser welding variables on the residual stress of 316L austenitic stainless steel using the Finite Element Method (FEM).

In this study, a pulsed Nd:YAG laser welding machine was used for experimental tests, and SYSWELD software was employed for numerical investigation u…

Numerical modeling of pulsed Nd:YAG laser welding of s310 austenitic stainless steel using Finite Element Method (FEM)

S310 stainless steel is used in various industries due to its high strength and corrosion resistance In this research, pulsed laser welding simulatio…