۳۴ رکورد مرتبط در نمایه علمیجو
The feasibility of friction stir welding has been studied on polypropylene sheets The experiments have been designed with taguchi method The joint st…
Friction stir welding FSW is a novel solid state welding process for joining metals and alloys This process is based on inserting a rotating tool to…
The effect of heat generation has been studied on the structure of friction stir welded polyethylene butt joints It is observed that generation is a…
The aim of the current paper is to present a novel exact solution for the temperature distribution during Friction stir welding FSW The thermal cycle…
Friction Stir Welding FSW applications in high strength alloys, such as stainless steel remain limited due to large axial welding force and consequen…
This paper presents the numerical and experimental investigations conducted to evaluate the effect of friction stir welding process parameters such a…
Friction stir welding FSW is a solid state welding process which has been successfully applied in several industries such as aerospace and automotive…
FSW has been successfully used to weld similar and dissimilar cast and wrought aluminum alloys, especially for aircraft aluminum alloys generally pre…
This investigation was undertaken to predict the tensile strength, elongation and hardness of friction stir welded pure copper Response surface metho…
Friction stir welding is a mechanical, solid state joining process that is used to joining structural aluminium alloys Compared with the fusion weldi…
Lap joint friction stir welding FSW between dissimilar Cu and Al alloys was investigated To produce the better quality welds, a layer of Cu was anodi…
AA7075 aluminum alloy has gathered wide acceptance in the fabrication of light weight structures such as aerospace applications that requiring a high…
Appropriate combination of mechanical properties of aluminum foam sandwich panels AFS makes them ideal materials for applications in automotive, ship…
The aim of this investigation was to understand the flow of material in the welded joint that is produced by a non threaded pin with four flats on th…
Onion ring structure is a prominent feature in many of the friction stir welds but the origin of this structure has not been firmly established yet I…
In the present research an appropriate tool design is developed for joining of AA2198 T3 and AA2024 T3, subsequently the influence of rotational and…
Auxetic metamaterials have a negative Poisson's ratio NRP , and this irregularity makes them suitable for numerous engineering applications, such as…
Al Si alloys are widely used in automotive and Aerospace applications because of their low Thermal Expansion coefficient, Good Wear Resistance, High…
The livestock sector can be responsible for developing food security, employment, social security and rural development Animal products are of specia…
Underwater Friction Stir Welding UFSW is one of the modern and constantly evolving technologies of solid state joining and it is used for welding a w…
Residual stresses or locked in stresses are one of the most significant mechanisms that are generated in almost all the welding processes During the…
Submerged friction stir welding SFSW is a modification of the friction stir welding processin which the water as the coolant is employed to standardi…
In this research, friction stir welding of aluminum 1050 to copper with variable speedwas investigated For friction stir welding, rotational speeds o…
Dissimilar joining of AZ31 magnesium alloy and St37 low carbon steel was performed through friction stir butt welding FSW at constant tool rotation r…
