مقالات حوزه «Microstructure»

Experimental and numerical study on severe plastic deformation of pure copper using simple shear extrusion process

Effect of heat input on the microstructure of AlCoCrFeNi high entropy alloy coating deposited using gas tungsten arc welding

AlCoCrFeNi based high entropy alloy coatings were deposited on low carbon steel substrates using gas tungsten arc welding process in different heat i…

The effect of heat input on the microstructure and wear behavior ofduplex stainless steel weld overlay applied to A283 carbon steel byGTAW method

In this research, the microstructure and wear behavior of duplex stainless steel weldcladdings produced at three heat inputs on A283 carbon steel sub…

Investigation on microstructure and corrosion resistance of inconel 625 overlay coating on 35NiCrMoV123 ultra-high-strength carbon steel

The ultra high strength steel, DIN 1 6959 35NiCrMoV123 has application manufacturing military components such as gun harrels The service conditions f…

Effect of processing parameters on characteristics of an Al-Al2Cu composite produced in situ by powder metallurgy

Al-Al2Cu composites due to their high Youngʼs modulus, good compressive strength, ductility, good tensile properties and high hardness have gained a…

Microstructural characterization of 316L stainless steel fabricated by direct metal deposition method

Microstructure, defects and hardness of 316L stainless steel fabricated by Direct Metal Deposition DMD method were investigated in this study 316Ll p…

Upset resistance welding of stainless steel to aluminium seri 6xxx

Aluminum and steel are the most utilized metals in industry and joining of these two has many applications including heat exchangers and parts in alu…

Butt Welding of 430 ferritic stainless steel thin sheet by microplasma arc welding

In this study, the similar joint bonding of 430 stainless steel thin sheet was investigated using microplasma welding as this method has a high arc e…

Evaluation of transient liquid phase bonding of Hastelloy C276 and 316 Austenitic Stainless Steel using the BNi-2 interlayer

In the present study, the effect of bonding time on the microstructure and mechanical properties of Hastelloy C276 and 316 austenitic stainless steel…

Microstructure and electrochemical behavior of dissimilar bonding of DP 980 and S 500 MC steels in chloride ion containing environments

The resistance spot welding method is one of the common methods in the automotive industry Therefore, in this paper, two alloys, DP 980 and S 500 MC…

Effect of temperature on microstructure of multi-layer diffusion bonded stainless steel

Diffusion bonding is a solid state bonding method in which two materials are bonded under pressure at a temperature below the melting point of the ma…

Improving the weldability of HP heat-resistant steel modified byniobium after long-term service at high temperature

In this study, the effect of solution annealing on the microstructure and weldabilityof aged HP heat resistant steel was investigated The microstruct…

Microstructural characterization of laser welding repair ofdirectionally solidified GTD-111 nickel-based superalloy

Wire based laser metal deposition WBLMD is one of the most promisingmethods for the build up and repair of the damaged nickel based superalloys compo…

Fabrication and characterization of Sn-Zn lead free solder

The increasing number of electronics has resulted in the durability of the solder joiningbeing one ofthe factors affecting the lifespan ofthese devic…

Investigation of heat input effect on microstructure and corrosion properties in dissimilar welded joints of A283 GrC steel to 304L stainless steel via SMAW method

In this study, the corrosion behavior of the dissimilar welded joints of 304L austenitic stainless steel and A283 Grade C carbon steel is investigate…

Evaluation of layering sequence on the efficiency of cladded ductile cast iron via SMAW

To increase the hardness and wearing resistance as well as to create a crack free clad on the ductile cast iron, two layers of clad via shielded meta…

Effect of Welding Speed on Microhardness, Microstructure, and Bead Geometry in GMAW Process

In this study, the effect of welding speed on the microhardness, microstructure, and weld bead geometry in the gas metal arc welding GMAW process was…

Lap joining of Al 5083 to polyamide 6 using TIG welding process

Today, metal and polymer compounds are widely used in the automotive, aerospace and electronics industries These compounds have a high ratio of stren…

Effect of filler metal on the microstructure of API 5L X65 welded steel joints coated with INCOLOY 825 superalloy produced by SMAW process

In this study, the effect of filler metal on the microstructure of API 5L X65 welded steel joints coated with INCOLOY 825 superalloy produced by SMAW…

Microstructure and mechanical properties of the welding zone in the Corten A to St12 joint by arc welding with shielded carbon dioxide

Due to the use similar welding of Corten A weathering steel and dissimilar welding of Corten A weathering steel with St12 plain carbon steel in indus…

The effect of friction stir processing on the microstructure andcorrosion resistance of commercially pure titanium

The optical microscope has been used for microstructure investigation, electrochemicalimpedance spectroscopy test for corrosion investigations, and h…

Evaluation of Nickel effect on the fatigue strength of E7018-G weld metal

In this study, the effect of nickel Ni on the fatigue strength of deposited weld metal from the E7018 G electrode was evaluated For this purpose, ele…

Welding of Corten-A weathering steel sheets – A Review

Weathering steel sheets, CORTEN A grade, has been used in the construction ofoffshorestructures, in which welding processes are utilized to join or r…

Investigation of the effect of filler metal type on the microstructure and mechanical properties of the joint in dissimilar welding of API 5L X52 / X65 micro-alloy steels by GTAW method

In this study, the effect of filler metal on the microstructure and mechanical properties of dissimilar joint API X52/X65 was investigated Welding wa…